Posted at November 23, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | MikroTik RouterOS ARM Firmware 6.39 RC 41 |
---|---|
Category | Router Switch Access Point |
Manufacturer | MikroTik |
File Size | 9.9 MB |
Supported OS | OS Independent |
- pppoe - added fastpath support when MRRU and MLPPP are enabled;
- tr069-client - added basic support for "/ip firewall filters";
- bridge - added "fast-forward" setting and counters (enabled by default only for new bridges) (CLI only);
- bridge - added support for special and faster case of fastpath called "fast-forward" (available only on bridges with 2 interfaces);
- filesystem - fixed rare situation when filesystem failed to read all configuration on startup;
- filesystem - fixed rare situation when filesystem went into read-only mode (some configuration might have gotten lost on reboot);
- l2tp - added fastpath support when MRRU is enabled;
- ppp - completely rewritten internal fragmentation algorithm (when MRRU is used), optimized for multicore;
- ppp - implemented internal algorithm for "change-mss", no mangle rules necessary;
- quickset - configuration changes are now applied only on "OK" and "Apply" (not on mode change);
- winbox - minimal required version is v3.11;
- address - fixed crash when address is assigned to another bridge port;
- capsman - added CAP discovery interface list support;
- capsman - added save-channel option to speed up frequency selection on CAPsMAN restart;
- capsman - added support for static virtual interfaces on CAP;
- capsman - fixed "/caps-man manager interface" compact export;
- capsman - support for communicating frame priority between CAP and CAPsMAN;
- certificate - allow CRL address to be specified as DNS name;
- chr - fixed problem when transmit speed was reduced by interface queues;
- defconf - fixed Groove 52 ac band settings;
- dhcp-client - added "script" option which executes script on state changes;
- dhcpv4-server - added "lease-hostname" script parameter;
- dhcpv4-server - do some lease checks only on enabled object;
- dhcpv6-server - require "address-pool" to be specified;
- email - check for errors during SMTP exchange process;
- ethernet - renamed "rx-lose" to "rx-loss" in ethernet statistics;
- export - do not show "read-only" IRQ entries;
- firewall - do not allow to set "time" parameter to 0s for "limit" option;
- gps - added "fix-quality" and "horizontal-dilution" parameters;
- graphing - fixed graph disappearance after power outage;
- hotspot - added access to HTTP headers using $(http-header-name);
- hotspot - show Host table commentaries also in Active tab and vice versa;
- ike1 - added more Radius accounting attributes - "event-timestamp", "acct-session-id", "acct-authentic", "acct-session-time";
- ike1 - fixed unnecessary Radius accounting requests;
- ike1 - fixed “xauth” Radius login;
- ike2 - also kill IKEv2 connections on proposal change;
- ike2 - always limit empty remote selector;
- ike2 - always replace empty TSi with configured address if it is available;
- ike2 - default to /32 peer address mask;
- ike2 - fixed EAP message length;
- ike2 - fixed ISA handler object removal on SA delete;
- ike2 - fixed ph2 state when sending notify;
- ike2 - fixed proposal change crash;
- ike2 - fixed responder subsequent new child creation when PFS is used;
- ike2 - fixed responder TS updating on wild match;
- ike2 - fixed state when sending delete packet;
- ike2 - update calling_station_id radius attribute;
- ike2 - update peer identity after successful EAP authentication;
- ike2 - update radius attributes;
- ippool - return proper error message when trying to create duplicate name;
- ipsec - added last-seen parameter to active connection list;
- ipsec - better responder flag calculator for console;
- ipsec - deducted policy SA src/dst address from src/dst address;
- ipsec - do not require "sa-dst-address" if "action=none" or "action=discard";
- ipsec - fixed "/ip ipsec policy group export verbose";
- ipsec - fixed "mode-cfg" verbose export;
- ipsec - fixed SA address check in policy lookup;
- ipsec - hide sa-addrs for transport policies;
- ipsec - keep policy in kernel even with bad proposal;
- ipsec - kill ph2 on policy removal;
- ipsec - updated tilera classifier for UDP encapsulated ESP;
- irq - properly detect all IRQ entries;
- leds - added LTE modem access technology trigger;
- leds - changed error message on unsupported board;
- leds - do not update single LED state when it is not changed;
- leds - show warning on print when "modem-signal-threshold" is not available;
- log - added "gps" topic;
- log - added tr069 topic;
- log - added warning when Winbox/Dude sessions were denied;
- log - make SNMP logs more compact;
- lte - added error handling for remote AT execute;
- lte - added initial support for Quectel ec25;
- lte - added support for Vodafone R216 (Huawei);
- lte - buffer AT events while info command is active;
- lte - fixed "/interface lte info X once";
- lte - fixed IPv6 address prefix on interface
- lte - fixed network mode selection for me909u, mu609;
- lte - fixed older standard CEREG parsing;
- lte - fixed support for Huawai R216;
- lte - fixed user-command;
- ppp - fixed rare kernel failure on PPP client connection;
- ppp-client - added support for Datacard 750UL and DWR-730;
- pppoe - make default keepalive 10s for PPPoE clients;
- profile - classify ethernet driver activity properly in ARM architecture;
- rb1100ahx2 - fixed random counter resets for ether12,13;
- snmp - "No Such Instance" error message is replaced with "No Such Object";
- snmp - added back MAC address OID in "/caps-man registration-table" (introduced in 6.39rc33);
- snmp - added SSID to CAPsMAN registration table;
- snmp - fixed "/tool snmp-get" crash on session timeout;
- snmp - fixed CAPsMAN registration table OID print;
- snmp - fixed CAPsMAN registration table SSID type;
- snmp - fixed situation when SNMP could not read "/system health" values after reboot;
- snmp - improved response speed when multiple requests are received within short period of time;
- snmp - optimized bridge table processing;
- tile - added initial support for NVMe SSD disk drives;
- tr069-client - added "Ethernet.Interface.{i}.MACAddress" parameter;
- tr069-client - added architecture name parameter (X_MIKROTIK_ArchName - vendor specific);
- tr069-client - added basic stats parameters for some interface types;
- tr069-client - added basic support for "/ip firewall filters";
- tr069-client - added connection request authentication;
- tr069-client - added DHCP server support;
- tr069-client - added parameters for DNS client management support;
- tr069-client - added ping diagnostics support;
- tr069-client - added support for escaped entity references (& < > ' ");
- tr069-client - added support for managing "/system/identity/" value;
- tr069-client - added support for memory and CPU load parameters;
- tr069-client - added traceroute diagnostics support;
- tr069-client - close connection if CPE considers XML as invalid;
- tr069-client - fixed special escape characters on XML data send;
- tr069-client - fixed “traceroute” parameter IDs;
- tr069-client - general improvements on reducing storage space;
- tr069-client - generate random connection request target path;
- tr069-client - increased performance on GetParameterValues;
- traceroute - small fix;
- usb - added support for more CP210X devices;
- userman - allow access to User Manager users page only through "/user" URL;
- userman - show warning when no users are selected for CSV file generation;
- wAP ac - improved 2.4GHz wireless performance;
- webfig - added menu bar to quickly select between Webfig, Quickset and Terminal;
- webfig - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- webfig - fixed delays on key press in terminal;
- webfig - fixed tab ordering on Google Chrome;
- webfig - improved field layout;
- webfig - make Terminal window work within Webfig window;
- winbox - added "group-key-update" to CAPsMAN security settings;
- winbox - added GPS menu;
- winbox - added save-selected setting under CAPsMAN channels;
- winbox - added static-virtual to wireless CAP;
- winbox - allow shorten bytes to k,M,G in firewall "connection-bytes" and "connection-rates";
- winbox - allow to change user password to empty one;
- winbox - allow to not specify certificate in IPSec peer settings;
- winbox - allow to specify certificate type when exporting it;
- winbox - allow to specify interfaces that CAPsMAN can use for management;
- winbox - allow unhide SNMP passwords;
- winbox - do not create time field when copying CAPsMAN access list entry;
- winbox - do not hide "power-cycle-after" option;
- winbox - do not show empty LTE fields in Info menu;
- winbox - do not try to disable dynamic items from firewall tables;
- winbox - fixed misleading error when trying to export certificate;
- winbox - hide advertise tab in Hotspot user profile configuration if "transparent-proxy" is not enabled;
- winbox - increased maximal number of Winbox sessions 20->100;
- winbox - make "power-cycle-interval" not to depend on "power-cycle-ping-enabled" in PoE settings;
- winbox - properly name CAP Interface on new interface creation;
- winbox - properly show BGP communities in routing filters table filter;
- winbox - removed "sfp-rate-select" setting from ethernet interface;
- wireless - added Egypt 5.8 country settings;
- wireless - apply broadcast bit to DHCP requests when using station-pseudobridge mode;
- wireless - do not allow equal MAC addresses between multiple Virtual APs when same master interface is used;
- wireless - fixed issue when wireless interfaces might not show up in cap mode;
- wireless - fixed occasional crash on interface disabling;
- wireless - fixed rare crash on nv2 configurations;
- wireless - fixed rare wireless ac interface lockup;
- wireless - fixed scan tool stuck in background;
- wireless - improved compatibility with Intel 2200BG wireless card;
- x86 - added support for NVMe SSD disk drives;
Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.
Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.
In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.
If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.
If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.
If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Router Switch Access Point File Size: 20.4 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 16.5 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 16 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 19.1 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 9.2 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 9.5 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 15.6 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 17.6 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 10.2 MB OS Independent
Install DriverDevice Type: Router Switch Access Point File Size: 7 MB OS Independent
Install DriverFind Missing Drivers
Recent Devices
Recent Drivers
© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.