JVC DLA-XC5890R Projector Firmware 83_2 Download

Posted at November 22, 2024 by PCI-DB Team

JVC DLA-XC5890R Projector Firmware 83_2 Description

Update:

- Plug in the AC cord and make sure the STANDBY LED illuminates. 
- Double click the “ILAFPJ2013_UP_GRADER.exe” file in the “upgrader_1button” sub-folder
1. Select the appropriate COM port.
2. Click the “…” Browse button to locate and select the “Main_u83_2.srec” update file in the “MainUpdate_u83_2” folder. 
3. Click the “Write all flash” button.
- The STANDBY indicator will change to green during the update:
- This update will take approximately 3 minutes to complete. You should see the screen on the right during the update process.
- After the update is finished, the complete window will pop-up. Also, the projector will be in STANDBY mode, with only the STANDBY LED illuminated.
4. Click the ‘OK’ button in the complete window, and then close the ILAFPJ2013_UP_GRADER program.
5. Unplug the AC cord and wait a few seconds for the STANDBY LED to turn off.
6. Disconnect the RS-232C cable from the projector. 7. Plug in the AC cord and power ON the projector.

Note:

Remove all cables from the projector prior to starting this procedure with the exception of the power cable.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related JVC Drivers