Sound Devices 664 Field Mixer Firmware 4.50 Download

Posted at November 23, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Sound Devices 664 Field Mixer Firmware 4.50
Category	Audio Dj Gear
Manufacturer	Sound Devices
File Size	1.6 MB
Supported OS	OS Independent

Sound Devices 664 Field Mixer Firmware 4.50 Description

New:
- Ctrl+T keyboard shortcut to toggle Tone On/Off

Changed:

- USB and VBus are now disabled during firmware updates.

Fixed:

- Track Name Editing from Channel Screen adds new entry rather than edits existing entry.
- 633 and 688 program files could be loaded onto the 664 and cause the unit not to boot.
- Long file names on exFAT formatted media are truncated.
- Factory Option for Scene Name can be overwritten by user if Scene Name is edited during record. This can cause Scene Increment Mode to stop working.

Known Issues:

- The list below are the published known issues for the latest 664 Firmware.
- Auto-Mute timecode modes output timecode for a few seconds after booting up from a full shutdown.
- Sound Devices has worked directly with Delkin to identify an intermittent Media I/O issue with newer Delkin CF 500x and CF 700x cards. Delkin has confirmed that a recent change to these two cards is most likely responsible for the errors. Cards containing KZ in the serial number are susceptible to this issue and should not be used. Cards containing VB in the serial number will function correctly and are approved. Deklin CF 1000x and 1050x cards do not experience this issue and may continue to be used.

Prepare to Update:

- Download the 664 firmware file.
- From the zip archive, extract the file within. Copy this .prg file to the root level of an approved SD or CF memory card. Do not place the file in any folder. Do not place the zip file on the SD or CF card. The card must be formatted in the 664.
- Apply Update to 664.
- Power the 664 from external DC. Do not perform the update with low batteries or unstable power sources.
- Power down the 664 if it is already powered up.
- Insert the SD or CF card with the .prg file.
- Power on the 664.
- Navigate to Setup Menu option SYSTEM > Update Firmware and follow the on-screen instructions.
- When the update is complete the 664 will power cycle itself. The version number will be displayed briefly on the splash screen while booting up. A message box appears "Firmware updated successfully Version: XXX". Press "OK". Please note any changes or additions to the Setup Menu (if applicable).

About DJ Mixers:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sound Devices Drivers