Samsung HW-F850 Soundbar Firmware 1004.0 Download

Posted at December 3, 2024 by PCI-DB Team

Samsung HW-F850 Soundbar Firmware 1004.0 Description

How to prepare Software Update file via USB flash drive:

1. Download the newest software file onto your computer.
2. If the software file is compressed (.zip), the file should be uncompressed. (.ROM file is Backend upgrade file and .ssp file is Frontend upgrade file)  
3. Connect a USB flash drive to your computer.
4. If there are previous versions of software on USB flash drive, please delete them. 5. Copy the software file to USB flash drive. (Copy the file in USB root directory as below)

[ Warning ]

1. The following events may interrupt the upgrade process and MAY RESULT IN PERMANENT DAMAGE TO THE UNIT.
- Unplugging the power cord while upgrades are being applied.  
- Power Outage while upgrades are being applied.  
- Remove the USB drive while upgrades are being applied.  
2. Please do not save .ROM file and .ssp file to the same USB flash drive.
3. Please do not re-name software file. We do not guarantee any defects caused by re-naming software file.

How to upgrade Software

1. Power on the device. Connect the USB device containing the newest software file to the USB port on the back of the product.
2. Press the ( ) button on the main unit’s top panel or the (SOURCE) button on the remote control to select the USB mode
3. Software will be upgraded automatically and then the main unit will turn off automatically after completing the software upgrade.
4. Once upgrading the product software is completed, the initializing is needed. Turn off the product(standby mode) and then press PLAY/PAUSE( ) button for a while (about 5 seconds) to initialize the product. After that, you can see the "INIT" message on the display.

About Speaker Firmware:

Install this firmware and your speaker can receive new configuration options, improved sound quality, different fixes for issues encountered throughout the speaker’s lifetime, and other changes that can enhance its stability and compatibility.

However, before downloading this version, make sure that your speaker unit could use the modifications that are to be made with it. Don’t get the new firmware if that’s not the case.

Since there are countless models and manufacturers, as well as different methods for updating the speaker unit, it would be best if you read and understand the installation steps before initiating the update process.

In addition to that, we recommend you perform the installation in a steady power environment, such as the one ensured by a UPS unit so that the device doesn’t encounter any malfunctions.

Therefore, if you wish to apply this version, click the download button, and install the package. Also remember to check with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Samsung Drivers