Pioneer DJM-900NXS2 DJ Mixer Firmware 2.01 Download

Posted at November 16, 2024 by PCI-DB Team

Pioneer DJM-900NXS2 DJ Mixer Firmware 2.01 Description

CHANGE HISTORY:

[FIXED]
- More precise cut lag value on both edges of the crossfader.
- PRO DJ LINK: The CDJ display froze when connecting to another computer while controlling DJ software from the CDJ using HID control.
- Small popping noise occurred when turning the EQ/ISO knob when ISOLATOR was selected for EQ CURVE.

Installation steps:

1. Dowload the firmware file to your computer and extract it.
2. Copy the file to a USB flash drive for the update.Please use a USB flash drive (Mass Storage Class) formatted in FAT or FAT32.
3. Turn on the power while pressing both [ON/OFF (BEAT FX)] and [MID (FX FREQUENCY)] buttons.
4. Insert the USB flash drive containing the firmware files into the USB port. The update process will begin and the progress bar and percentage will be displayed on the screen.
5. When the message [COMPLETE] appears, the update is completed. Please turn the power off and disconnect the USB flash drive. The update has been completed!

Note:

- Do not turn the power off or disconnect the USB flash drive during the update.
- The update will be completed in approximately 2 minutes.

About DJ Mixer Firmware:

Updating the mixer’s firmware version can add support for newly developed features (or improve existing ones), enhance audio quality and transition effects, resolve different problems such as those regarding various noises heard in certain situations, and many other related improvements.

However, before downloading this package, go to the unit’s system information and make sure that the currently installed firmware isn’t either newer or matches this release. Moreover, you should know that an update failure might seriously damage the mixer’s software, so it is vital that you are familiar with the installation steps.

As for applying this release, you must transfer the downloadable package (or its content) to the mixer via any available methods, and power up the unit through various key combinations in order to enter update mode (make sure you read the product’s user guide).

This said, if you consider installing this release and you’re positive you have all the knowledge you need for a successful upgrade, download the package, and apply it to your mixer. Check with our website constantly so that you don’t miss any update that can improve your device. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Pioneer DJ Drivers