Billion BiPAC 7300RA Router Firmware 1.06e_A.zip Download

Posted at December 31, 2024 by PCI-DB Team

Billion BiPAC 7300RA Router Firmware 1.06e_A.zip Description

New Features:

- Added the 3G operator selection.

Improvement:

- Display model name instead of WebAdmin on login window.
- Added the action (none block/forward) on the MAC Filter page.
- Improved mail alert content for 3G statistics.
- Improved format of 3G statistics on WEB GUI.
- Added the redundant check on the QoS and Packet Filter Rule.
- Improved UPnP display information.
- Limited the DHCP server pool range to 256.
- Corrected the valid host IP checking rule.
- Improved WEB login method and requires to input the user account each time.
- Make Quick Start to the same as EZSO.
- Added login button on EZSO warning page.
- Improved time schedule behavior, if no day enabled at the specify time schedule slot, it will be viewed as disabled.
- Allowed multiple VLAN tag assigned to the same Ethernet port. (The WLAN port on 7300N can be assigned to one VLAN group only.)
- Added the authentication protocol selection on 3G setting page. 

Bug Fixed:

- Fixed bug that time schedule for URL Filter is not updated correctly.
- Fixed bug that PPPoE can not be disconnected correctly with PPPoE Pass-through mode.
- Fixed bug that UPnP function is not work correctly after changing LAN IP address.
- Fixed bug that mask of LAN IP address is not updated to DHCP server while only mask value changed.
- Fixed bug that PING will fail between two VLAN groups. Known

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Billion Drivers