Billion BiPAC 7300RA Router Firmware 1.06f-A.afw Download

Posted at November 21, 2024 by PCI-DB Team

Billion BiPAC 7300RA Router Firmware 1.06f-A.afw Description

New Features:

- Added E160G, Sierra C885, MC990D, Alcatel OT-X020, Option iCON 225, ZTE MF636and Maxon 3G modem support.
- Added SIP-ALG parses/translates PING request support.
- Added ADSL TX attenuation support.
- Added WMM support on 7402NX/7404VNPX/7404VNOX.
- Added AdamTalk in VoIP service provider list. (AU version only).
- Added TKIP/AES option for WPA/WPA2 on 7402NX/7404VNPX/7404VNOX.
- Added Enrollee/Registrar mode for 11g models.

Improvements:

- Updated wireless driver to version 2.17.33.0 to improve interoperability issue with Intel and Atheros chipset. (11n models are not included due to different wireless module.)
- Removed "select profile" item in the phone port settings page.
- Improved the settings for VoIP default ports, now, users can see/edit default VoIP port settings in Advanced -> Configuration -> VoIP -> SIP Account.
- Extended the length of APN to 64 characters.
- Improved PPP module for handling 3G connection.
- Increased VoIP default volume value. (For 7404VNOX/VNPX only)
- Added current digit map on VoIP Dial Plan page.
- Improved the system stability for 11n module.
- Added some new DDNS server support for South Africa.
- Ping message in console hidden when doing failover/fallback check.
- Changed Australian default ring back tone setting.
- Speed up the system boot up time.
- Removed Check Mail function with models that have no Mail LED indication.
- Changed DSP code version to E25.41.55 for improving ADSL sync rate in AU.
- Added MTU option to 3G, Quick Start, and Basic WAN setup.
- Changed Dial Plan Priority to mode 2 for AU area.
- Added ADSL Elapsed Time to ADSL status page.

Bugs Fixed:

- Fixed the bug whereby Line LED does not light when receiving/making call from/to PSTN.
- Corrected ADSL "CRC Errors" counter in ADSL status webpage.
- Fixed the bug whereby Edit/Delete button can’t work on IP Alias webpage.
- Fixed the bug whereby some small icons can’t be shown in Firefox browser.
- Fixed the bug whereby MSN Messenger blocking function does not work when firewall security enabled.
- Limit the VPI/VCI range (VPI:0~255, VCI:1~65535).
- Fixed the bug whereby no Connect/Disconnect button is shown on Status webpage when using 3G connection.
- Corrected ADSL information when main port is set to 3G.
- Fixed the bug whereby MPoA settings can’t be edited.
- Fixed the bug whereby virtual Server settings are missed when more than one PVC setting is created.
- Fixed the bug whereby QoS does not work when using 3G connection.
- Fixed the bug whereby Call log can’t show longer phone number over 16 numbers.
- Fixed the bug whereby L2TP remote access does not work. (L2TP connection can be established but no data is passed)
- Fixed the bug whereby Global IP pool settings will be lost when changing main port from ADSL to 3G.
- Fixed the bug whereby Edit button does not work in User Management WEB GUI.
- Fixed some 3G USB CDMA mode potential bugs.
- Fixed the bug whereby Sierra 3G modem cannot be disconnected.
- Fixed the bug whereby wireless MAC filter doesn’t work on 7402NX.
- Fixed the bug whereby user will lose dial tone on FXS port sometimes. (Only for VoIP series).
- Fixed the bug whereby the system just crashes suddenly. It was caused by UPnP module bug.
- Fixed the timing bug between wireless settings and USB modem detection. It may cause system crash sometimes.
- Fixed the bug whereby ”VOIP in Use” is missing in Outbound Throttling on QoS settings page.
- Fixed the bug whereby user can not select dial on demand with 3G connection in WEB GUI.
- Fixed some bugs with VoIP settings in WEB GUI.
- Fixed the bug whereby UPnP can’t be closed completely. (Need to save configuration and reboot again.)
- Fixed the bug whereby 3G connection doesn't work after configuring VoIP and restarting device.
- Fixed the bug whereby TCP/UDP option doesn’t work on Virtual Server settings page.
- Fixed some SIP account WEB settings.
- Fixed the bug whereby Connect/Disconnect button does not work in basic mode.
- Fixed the bug whereby second IPSec rule cannot be deleted.
- Fixed the bug whereby error message will pop up after disabling PPTP dial in profile then changing LAN IP address.
- Fixed the bug whereby WPS doesn’t work correctly under basic mode.
- Fixed the bug whereby Wireless cannot surf Internet with some VLAN configuration types.
- Corrected daylight saving settings for AU.
- Fixed PSTN voltage detection issue.
- Fixed memory loss issue with 11n models.
- Fixed the bug whereby system will crash when changing wireless settings (only happens on 11n models).
- Fixed the bug whereby system will crash when issueing console command "l2tp list".
- Fixed some IPSec settings & instability issues on WEB GUI.
- Fixed the bug whereby QoS doesn't work with phone port 2.
- Fixed the bug whereby MPoA doesn't work with PVC 2~8.
- Fixed the bug whereby ENUM doesn't work.
- Fixed the bug whereby failover doesn’t work when using "Ping Host" method, and the WAN interface is using dynamic IP.
- Fixed the bug whereby PSTN call has bad echo.
- Fixed bug whereby PPPoA PAP can be changed to Chap(Auto), but Chap(Auto) still can’t be changed to PAP in "Basic" mode.
- Added VoIP “Sync Now” button.
- Changed FXS-1 to Phone Port 1 and FXS-2 to Phone Port 2.
- Changed default NTP servers for AU area.

Installation Procedure:

- Save the downloadable package.
- Log into the router’s web user interface.
- Navigate to the firmware upgrade section of your wireless unit.
- Select the present firmware and configure your router to install this file.
- Wait as the device carries out this process.
- Reboot the unit if required.

About Router Firmware:

Before you consider downloading this firmware, go to the system information page of the router and make sure that the currently installed version isn’t either newer or matching this release.

Due to the large variety of router models and different methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you apply the new firmware, even if you are a power user.

In theory, these steps shouldn’t be much of a hassle for anyone, because manufacturers try to make them as easy as possible, even if they don’t always succeed. Basically, you must upload the new firmware to the router through its administration page and allow it to upgrade.

If you install a new version, you can expect increased security levels, different vulnerability issues to be resolved, improved overall performance and transfer speeds, enhanced compatibility with other devices, added support for newly developed technologies, as well as several other changes.

If you’re looking for certain safety measures, remember that it would be best if you perform the upload using an Ethernet cable rather than a wireless connection, which can be interrupted easily. Also, make sure you don’t power off the router or use its buttons during the installation, if you wish avoid any malfunctions.

If this firmware meets your current needs, get the desired version and apply it to your router unit; if not, check with our website as often as possible so that you don’t miss the update that will improve your device.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Billion Drivers