Yamaha MOTIF7 Synthesizer Firmware 1.70 Download

Posted at May 9, 2024 by PCI-DB Team

Yamaha MOTIF7 Synthesizer Firmware 1.70 Description

How to Update the MOTIF series Operating System

Note:Before you go through the following steps, copy the downloaded OS Data (.PGM) onto a 8MB or higher Smart Media card. There should be no other data on the Smart Media card.

1. Turn off the Motif’s power.
2. Insert the Smart Media card containing the OS data into the Motif’s card slot on the rear panel .
3. Turn on the power while pressing the “REC” and “STORE” buttons. This will display the [MOTIF6,7,8 OS Updater] screen.

Note:

At the bottom of the LCD , the display will now say :
[Insert card including only one PGM file ,and press ENTER to load. Or play in Standard MIDI file including the KERNEL SysEx Data].
This does not mean that the Motif can be updated through MIDI. A full OS update of MOTIF (not just the Kernel) can only performed from a Smart Media card.
4. Press “ENTER” button to start loading from Smart media.
Loading will take approximately 2 minutes.

Note:

DO NOT turn off the Motif’s power, remove the smart media or operate any buttons or keys while in the process of updating.
When [Completed. Reboot MOTIF6,7,8] appears on the screen, the update is completed. However it is recommended that you do a factory reset after updating.
5. Turn off the power.
6 Remove the Smart Media card from the slot
7. To return the unit to its factory settings, turn on the power while pressing the “REMOTE” and the “REC” buttons to display the [MOTIFx Test Program] screen. *Note: DO NOT release the “REMOTE” and “REC” buttons until the screen appears, as it takes several seconds.
Confirm that [firm Ver: 1.40] appears in the upper portion of the LCD
8. Press the “STORE” button.
Factory ReSet runs and the data is set back to the factory default settings.
9. Press “YES” button to exit the Test Program.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Yamaha Drivers