D-Link DGS-3000-10TC rev.B Managed Switch Firmware 3.00.006 Download

Posted at November 1, 2024 by PCI-DB Team

D-Link DGS-3000-10TC rev.B Managed Switch Firmware 3.00.006 Description

Upgrade firmware by Web-UI

1. Connect a workstation installed with java SE runtime environment to any switch port of the device.
2. Open the web browser from the workstation and enter the IP address of the switch. The switch’s default IP address is 10.90.90.90.
3. Enter administrator’s username and password when prompted. It should be noted that the username and password are blank by default.
4. To update switch's firmware or configuration file, select Tools > Download Firmware from the banner.
5. Enter the TFTP Server IP address.
6. Enter the name of the firmware file located on the TFTP server.
7. Enter the destination path and the desired file name.
8. Click Download button.
9. Wait until the Current Status displays Done and the Percentage shows 100%.
10. To select the boot up image used for next reboot, click Network Application > Flash File System Settings in the function tree and then click the C: drive name. When you see the files list, click corresponding Boot Up button to specify the firmware that will be used for next and subsequent boot up.
11. To reboot the switch, select Tools > Reboot System from the banner. 12. Select Yes and click Reboot button to reboot the switch.

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers