D-Link DWC-2000 rev.A1 Wireless Controller Firmware 4.5.0.2 Download

Posted at April 28, 2024 by PCI-DB Team

D-Link DWC-2000 rev.A1 Wireless Controller Firmware 4.5.0.2 Description

New Features:

1. DWL-8710AP Support
2. Multiple LDAP SSID Mapping Enhancement
3. Hotspot enhancement changes
4. AP firmware upgrade enhancement.
5. New Dashboard and Wizard feature set.

Problems Fixed:

1. Unable to delete/deactivate the licenses through CLI HQ20130426000004
2. OpenSSL Vulnerability Change Cipher
3. Device is vulnerable to SQL injection attack for cookie.
4. Device is vulnerable with SRTP Memory Leak (CVE-2014-3513)
5. Not able to perform trace route or ping functionality of ipV6 addresses from diagnostics page HQ20141104000020
6. Need enable 80Mhz for Mexico
7. WLAN IP address display 10.90.90.90
8. Observed critical error after STA pass captive portal Login in IE11 browser(DWC-1000) HQ20150204000014
9. Unable to open the GUI/frontdesk page of DWC-2000 device when it is connected to DSR device in NAT mode HQ20150324000017
10. Observed critical error in the IE 11 browser when user refreshes CP window.
11. Eliminate the double quote for WPA/WPA2 key in the "print ticket" of DWC-1000 device HQ20150518000017
12. Observed critical error in discovered ap page when we add large ip range HQ20150804000021
13. WEP security mode is not persisting after reboot for the default vap ssid's in dwc-2k
14. Upper level channels are not displaying in 5GHz radio for all countries.
15. When changing the radio Primary Channel from lower to upper then bandwidth is also getting effected from 40 to 20 HQ20150907000008
16. IN CLI and in status dashboard memory utilization values should have unit MB not KB HQ20150930000015
17. Enable redirect functionality not working on mobile devices when CP type as SLA HQ20151006000015
18. DWC-2000: Device is vulnerable to CSRF attack.
19. Channels list in managed ap page, in status managed ap page channel list pages are different from ap profile radio page HQ20150701000015
20. User is able to add the ip address in the DHCP pool which is alredy configured in the DHCP reserved IP page HQ20150810000022
21. license activation page is not working in Localization branch
22. Able to save diff serv policy with diff serv class which doesn't have a match selector HQ20141110000017
23. Need to apply the patch for Multiple Vulnerabilities#CVE-2015-3195
24. Wireless configuration is not persisting some time
25. Unable to open DWC-1000 GUI pages when device is behind NAT with Port forwarding Rule HQ20151221000015
26. Force roaming option is getting disabled after reboot for managed ap entry added in valid access points page HQ20160106000002
27. Static key is being used for SSH Communication.
28. critical error in managed ap page HQ20151216000013
29. Ignore Broadcast option need to be removed from cli for ssid configuration 30. When both the radio of peermanaged ap is off then channel is not getting updated in master HQ20160201000019
31. Need to add test build patch for the "High CPU utilization issue"
32. Observed 500 Internal Server error with customer configuration file HQ20160127000016
33. Able to configure CP type [SLA/Permanent/Temporary] for the Control VLAN from CLI HQ20160201000014
34. Spelling mistake in pay pal configuration page. HQ20160218000017
35. LAN related logs are not coming in DWC-2000 HQ20160126000017
36. Need to add port 443 for remote management and ssl vpn
37. SSL/TLS use of weak RC4 cipher-CVE-2013-2566
38. DWC-2000 M2 : Increase the MAC Auth database limit to 2048 
39. Cavium glibc “Skeleton Key” Vulnerability Notification – CVE 2015-7547 40. The managed APs location information will be incorrectly overwritten. DBG14070102 41. [DWC] WDS link status and statistics pages are showing incorrect radio modes for the WDS connection in DWC-2000 DBG15100075

Wireless Controller Firmware Upgrade

Path: Maintenance > Firmware > Firmware Upgrade > Using System (PC)

1. In the wireless controller web management interface, click Maintenance > Firmware > Firmware Upgrade.
2. If the firmware version on the D-Link support website has a higher number than the firmware version shown under Firmware Information, continue with this procedure.
3. Download the new firmware from the D-Link website.
4. Under Firmware Upgrade, click the Choose File button.
5. In the Choose File dialog box, navigate to the firmware file, and then click the file and click Open. If you want to upgrade using a file from a USB drive, click the Using USB tab near the top of this page.
6. Click Upgrade.
7. At the confirmation message, click OK to start the firmware upgrade. A progress bar shows the progress of the upgrade.
Note: The upgrade process takes a few minutes. Do not interrupt the upgrade or turn off the system; otherwise, you can damage the firmware. Wait for the upgrade to complete before browsing any sites from your browser.
8. When the upgrade completes, log in to the wireless controller web management interface, click Maintenance > Firmware > Firmware Upgrade, and confirm that the new firmware appears next to Firmware on the Using System (PC) page.
9. Record the firmware level in Appendix A.

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers