Samsung HW-J650 Soundbar Firmware 3109.2 Download

Posted at December 20, 2024 by PCI-DB Team

Samsung HW-J650 Soundbar Firmware 3109.2 Description

Updating With USB:

- If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar.
- Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the firmware one file at a time.

Updating Procedure :

1. Connect a micro USB to USB adapter cable with a male USB 2.0 micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type a) on the other end to the micro USB jack on your Soundbar.
2. Download the product software
3. Save the downloaded software to a USB stick and select "extract to the folder name" to unzip the folder.
4. Turn off the Soundbar and connect the USB stick containing the software update to the female port on a micro USB adapter cable.
5. Turn on the Soundbar. Within 3 minutes, Update is displayed and updating begins.
6. after the update is complete, the Soundbar turns off and on again.

About Speaker Firmware:

Install this firmware and your speaker can receive new configuration options, improved sound quality, different fixes for issues encountered throughout the speaker’s lifetime, and other changes that can enhance its stability and compatibility.

However, before downloading this version, make sure that your speaker unit could use the modifications that are to be made with it. Don’t get the new firmware if that’s not the case.

Since there are countless models and manufacturers, as well as different methods for updating the speaker unit, it would be best if you read and understand the installation steps before initiating the update process.

In addition to that, we recommend you perform the installation in a steady power environment, such as the one ensured by a UPS unit so that the device doesn’t encounter any malfunctions.

Therefore, if you wish to apply this version, click the download button, and install the package. Also remember to check with our website as often as possible so that you don’t miss a single new release. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Samsung Drivers