Sony PXW-X160 XDCAM Camcorder Firmware 4.00 Download

Posted at November 27, 2024 by PCI-DB Team

Sony PXW-X160 XDCAM Camcorder Firmware 4.00 Description

Function added with Ver.4.0

1. New series XQD memory card supported
The camcorder adds support for the new Sony Mseries XQD memory cards. In addition to existing G-series memory cards,
Gseries QD**E memory cards can also be used. (where the number ** indicates the capacity). (PXW-X180 / PXW-X160)
2. Proxy recording in network client mode (PXW-X180)
3. File transfer in network client mode (PXW-X180)
4. Copying clips (PXW-X180 / PXW-X160)
5. Additional audio reference level settings
Input audio reference levels –80dB and –70dB have been added to “INPUT1
Reference” and“INPUT2 Reference” in “Audio Input” of the Audio menu.
(PXW-X180 / PXW-X160)
6. Support RM-30BP and RM-1000BP (PXW-X180 / PXW-X160)
7. Improvement of the stability of some other operations (PXW-X180 / PXW-X160)

Update the System Software:

1. Insert the media card (SD/SDHC) for the system software version update, and turn the POWER ON by turning the “POWER” switch.
2. Go to “Version” in the “System” menu and select “Version Up”.
Please use the AC Adapter; Upgrade Version will appear on the screen.
3. Select “Execute”
Version Upgrade VX.XX > VY.YY will appear on the screen （X.XX: former version, Y.YY: new version)
4. Select “Execute”
Version update will begin. Version update will be executed in two phases, Phase 1 and Phase 2. When the version update begins, the REC lamp will start blinking, and [Version Upgrade Elapsed Time XX:YY:ZZ Executing… XX%] will appear on the screen. (XX:YY:ZZ: Elapsed time, XX%: finished percentage）
5. Reboot the camera.
6. Check the system software version.

About Digital Camera Firmware:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sony Drivers