SMC SMC2552W-G2 Access Point Firmware 5.0.1.1 Download

Posted at December 22, 2024 by PCI-DB Team

SMC SMC2552W-G2 Access Point Firmware 5.0.1.1 Description

Firmware History

- Cleared debugging error messages.Improved SSH initiation when resetting system configuration.

Upgrade Procedure

1. Make sure your SMC2552W-G2 is connected to your LAN, turned on and can be accessed from your PC that you would like to use for the firmware udpate.
2. Connect to the Web user interface by typing the AP's IP Address (ex: 192.168.2.2) in your browser, enter username and password to login.(default: admin/smcadmin) 
3. Click on the "Advanced" link, then click the "Administration" option. The "Firmware Upgrade" screen will appear.
4. Click the "Browse" button and point it to the location of the firmware file.
5. Next click the "Apply" button and follow the prompts. You will notice the lights on the AP will react in a certain sequence. Wait patiently while the AP reboots itself.
6. Your SMC2552W-G2 has now been successfully upgraded. 

About Access Point Firmware:

If you update the Access Point (AP) firmware, your device can benefit from changes that fix multiple issues encountered by wireless clients, correct different user interface problems, add various functionalities, and include support for newly developed protocols.

Before performing this task, we recommend that you read and understand all the installation steps, because there are many AP models and manufacturers available. Each producer strives to make the procedure as simple as possible, but there are cases when it’s anything but that.

It is also advisable that you apply a new access point firmware in a steady power environment (UPS unit will satisfy this need), using an Ethernet cable rather than a wireless connection. The latter can be easily interrupted.

With this in mind, if you wish to apply this version, click the download button and install the package on your access point. Remember to check back with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related SMC Drivers