D-Link DCS-7010L A1 IP Camera Firmware 1.03.07 Download

Posted at November 22, 2024 by PCI-DB Team

D-Link DCS-7010L A1 IP Camera Firmware 1.03.07 Description

New Features:

1. Update the mydlink agent to 2.0.17-b41
2. Support MP4 recording format
3. Added Schedule Reboot function

Problems Fixed:

1. Fixed the issue of ICR switch failed in schedule mode after device reboot.
2. Modified that when pre/post event image is set as 0, the device should send off one snapshot.
3. Modified FTP time-out to 240 seconds.
4. Fixed the issue that the device isn’t deleted from mydlink after factory reset and re-connecting to Internet.
5. Fixed the issue that failed to delete the first user info in the guest list.
6. Fixed the issue that when SD memory size is full by recording, the e-mail notification isn’t sent off.
7. Fixed the issue that mydlink account is cleared out after downgrading to the previous FW version.
8. Fixed the issue that ePTZ patrol would be stopped unexpectedly when patrol runs for a long time.
9. Fixed the issue that profile 2 would be black screen when live view runs with ePTZ patrol for a long time.
10. Fixed the issue that there are some event recording files on SD card are abnormal.
11. Fixed the issue that camera IP doesn’t update to DDNS.
12. Modified the event setup that needs to create 2 media for 2 events.
13. Fixed the issue that camera would stop to upload the video clips to the FTP server after performing the endurance test for 5 hours.
14. Fixed the issue that live video would be white screen in non-IE browsers.
15. Fixed the issue that character “.” cannot be applied to FTP folder name.
16. Fixed the issue that there is error message, “someone is speaking, please try again later.” showing on Safari when enable talk function on mydlink portal.
17. Fixed the issue that failed to change password in advanced setting page of mydlink portal.
18. Fixed the issue that recorded video file name shows “::” on mydlink portal.
19. Fixed the issue that live view didn’t show on complete setup page of Setup Wizard.
20. Fixed the issue that the live view would be black sometimes when switching video resolution from 480P to 240P or 720P on mydlink portal.
21. Fixed the issue that always showed motion alert on mydlink live view page when enable motion detection.
22. Fixed the issue that cannot input password in the login window for RTSP authentication.

Installation steps:

1. Download the latest firmware file for your device.
2. Log into your device’s web interface.
- Open Internet Explorer, and browse to your cameras IP address. For example, if your cameras IP address is 192.168.0.100, in the address bar of your web browser type: http://192.168.0.100 .
- Enter your cameras username and password.
3. Click on Maintenance, then on Firmware Upgrade.
4: Click on Browse, select the downloaded firmware and then click the upload button.

Important notice:

- All firmware upgrades should be done over a WIRED connection. If your camera is currently configured wireless, plug it directly into your router before proceeding.
- Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers