D-Link DCS-6004L IP Camera Firmware 1.02.03 Download

Posted at November 21, 2024 by PCI-DB Team

D-Link DCS-6004L IP Camera Firmware 1.02.03 Description

New features:

1. Prevent brute force attack
2. Change to agent 2.0.19-b39

Problems Fixed:

1. Disable FTP port
2. Some buttons are not displayed on Chrome.
3. Privacy Mask cannot be selected on Chrome
4. No column for daylight saving setting of increasing and decreasing hours.
5. After enable COS and save setting, it could access DUT without VLAN setting on PC.
6. Live view in HTTPS would be continued after reset the DUT
7. After change https port (setting:3388) to "443" and http port to "3388" then could not access webUI normally.
8. Set time zone "GMT+4:00 Baku" but after setup that setting value of webUI is "GMT+4:00 Tbilisi."
9. Could not upload certificate file successfully. After upload certificate file, it shows "404" error message.
10. Access DUT http stream by VLC normally and change http port, but VLC could still live view successfully.
11. Connect to DNR-312L for awhile, the connection will be full and unable to connect.
12. Fix security issue from institute for information industry
- OpenSSL CCS Injection
- IPv4 SYN Flood DoS
- IPv4 SYN-ACK Flood DoS
- IPv4 Smurf Flood DoS
- IPv4 UDP Flood DoS
- SSL / TLS Renegotiation DoS
- IPv6 DAD DoS - IPV6 Neighbor Advertisement Flood DoS
- acces.cgi Command Injection
- datetime.cgi Command Injection
- Config Backup Administrator Password Stored in Cleartext
- TLS/SSL Server Supports Weak Cipher Algorithms
- Admin password Stored in Web Page

Installation steps:

1. Download the latest firmware file for your device.
2. Log into your device’s web interface.
- Open Internet Explorer, and browse to your cameras IP address. For example, if your cameras IP address is 192.168.0.100, in the address bar of your web browser type: http://192.168.0.100 .
- Enter your cameras username and password.
3. Click on Maintenance, then on Firmware Upgrade.
4: Click on Browse, select the downloaded firmware and then click the upload button.

Important notice:

- All firmware upgrades should be done over a WIRED connection. If your camera is currently configured wireless, plug it directly into your router before proceeding.
- Do not start or use other applications while upgrading your device’s firmware, and do not hit Stop, Back, or Reload in your web browser during the upgrade process.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers