D-Link DCS-2310L Rev.A1 IP Camera Firmware 1.03.08 Download

Posted at November 1, 2024 by PCI-DB Team

D-Link DCS-2310L Rev.A1 IP Camera Firmware 1.03.08 Description

New features:

1. Update the mydlink agent to 2.0.17-b76
2. Support MP4 recording format
3. Added Schedule Reboot function

Problems

Fixed
1. Fixed the issue of ICR switch failed in schedule mode after device reboot.
2. Modified that when pre/post event image is set as 0, the device should send off one snapshot.
3. Modified FTP time-out to 240 seconds.
4. Fixed the issue that the device isn’t deleted from mydlink after factory reset and re-connecting to Internet.
5. Fixed the issue that failed to delete the first user info in the guest list.
6. Fixed the issue that when SD memory size is full by recording, the e-mail notification isn’t sent off.
7. Fixed the issue that mydlink account is cleared out after downgrading to the previous FW version.
8. Fixed the issue that camera IP doesn’t update to DDNS.
9. Modified the event setup that needs to create 2 media for 2 events.
10. Fixed the issue of FTP access problem with special character “$” used for the first letter of account data.

Installation steps:

1. Download the firmware. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse… and specify the firmware file.
4. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers