Grandstream GXP2135 IP Phone Firmware 1.0.8.26 Beta Download

Posted at November 21, 2024 by PCI-DB Team

Grandstream GXP2135 IP Phone Firmware 1.0.8.26 Beta Description

IMPORTANT UPGRADING NOTE:

- For GXP2130/2140/2160, once upgraded to 1.0.7.15 or above, downgrading to 1.0.5.x firmware version or lower is not supported.
- For GXP2135/2170, once upgraded to 1.0.7.15 or above, downgrading to 1.0.6.9 firmware version or lower is not supported.
- This release has Predictive Dialing feature which includes a required internal change. If you downgrade from 1.0.8.26 to 1.0.7.25 you will lose the call history
- This release restored the Weather service. Part of the change requires users who are using “Self-Defined City Code” to change their setting. The upstream content provider has changed the API to yield a free-style search based on this argument instead of mapping to a specific code being used before. Hence the city being displayed would have been incorrect. These users should change this option to the name of the city, for instance: “Dallas”; “Dallas, NC”; “Dallas, Scotland”; “Liverpool”; “Liverpool, NY”; “Liverpool, England”.
- Note: If you enter only the name of the city it’s going to go the best match. In the case of Dallas it would be Dallas, TX; and in the case of the Liverpool it would be Liverpool, England.

ENHANCEMENT:

- Added DND Barge - Internal Calls and Paging [DND BARGE]
- Added user option to enable Plantronics EHS headset ringtone [EHS HEADSET RINGTONE]
- Hided Caller ID info on line key and BLF Presentation [HIDE BLF REMOTE STATUS]
- Enabled RTCP & RTCP-XR [ENABLE RTCP & RTCP-XR]
- Added “Link” command to display 100Mb/s for Gigabit ports [LINK COMMAND]
- Added support TLS negotiation over TLS v1, TLS v1.1 and TLS v1.2 for SIP [TLS NEGOTIATION]
- Added VPK paging support inside call screen [VPK PAGING SUPPORT INSIDE CALL SCREEN]
- Outbound notification enhancement [ENHANCEMENT FOR OUTBOUND NOTIFICATION]
- Added support for Up/Down line switching when call screen is under active/overview state [LINE SWITCHING IN CALL SCREEN]
- Added support to send SIP log without enabling debug level [SIP LOG SUPPORT WITHOUT ENABLING DEBUG LEVEL]
- Added transfer destination should display who the call was referred by [WHERE THE CALL ARE TRANSFERRED FROM]
- Added MAC address display in the header of SIP Register [MAC HEADER SUPPORT IN SIP ]
- Added ability to remove “target” softkey [TARGET SOFTKEY REMOVAL]
- Added ability to remove SIP error on LCD [SIP ERROR MESSAGE DISPLAY REMOVAL]
- Added requirement sending instant message from the web [SENDING INSTANT MESSAGE FROM THE WEB]
- Added Attended Transfer softkey (AttTrnf) when Blind Transfer is processed [ATTENDED TRANSFER IMPROVEMENT]
- Added features that supports configurable option for RFC2543 HOLD (0.0.0.0) and RFC3261 (a line) [RFC2543 HOLD SUPPORT]
- Added the ability to manage Call History ability from Web GUI [CALL HISTORY MANAGEMENT]
- Enhanced intercom options (includes Intercom Mute, Intercom Tone, and Intercom Barge) [INTERCOM SETTINGS SUPPORT]
- Added customizable Softkey Layout [SOFTKEY LAYOUT CUSTAMIZATION]
- Added DND Authorized Number (Whitelist) & Blacklist and other enhancement [DND ENHANCEMENT]
- Added CTI support [CTI SUPPORT]
- Enhanced MORE softkey selection (list of the More softkey items instead of letting user keep tapping MORE to switch to different page) [MORE SOFTKEY DISPLAY MODE]
- Added the Web GUI default password warning message with password change shortcut [WEB GUI DEFAULT PASSWORD WARNING MASSAGE]
- Improve Bluetooth handsfree device connecting process [BLUETOOTH CONNECTING ENHANCEMENT]
- Enhance Instant Message List page to display to match the rest of the menu pages
- Added contact picture/icon through SIP Call-Info header [CONTACT PICTURE SUPPORT]
- Added LINE key mode support, coexisted with legacy mode [LINE KEY MODE SUPPORT]
- Added Live DialPad Feature [LIVE DIAPAD FEATURE SUPPORT]
- Added Automatic Redial Function [AUTOMATIC REDIAL SUPPORT]
- Added Preferred Default Account [PREFERRED DEFAULT ACOUNT SUPPORT]
- Added GXP2200EXT LCD timeout [GXP2200EXT LCD TIMEOUT]
- Split Firmware/Config Upgrade Method/Username/Password [SPLITING FIRMWARE/CONFIG UPGRADE METHOD]
- Added ability to filter characters from dialed numbers [FILTER CHARACTERS FROM DIALED NUMBERS]
- Added ability to enable/disable local call forwarding rules without erasing configured numbers [DISABLING LOCAL CALL FORWARDING RULES ENHANCEMENT]
- Added specific model configuration file [SPECIFIC MODEL CONFIGURATION FILE]

BUG FIX:

- Fixed device stops at “Upgrading” screen after uploading correct firmware file with wrong name
- Fixed screensaver is On but it will close when VPK is active
- Fixed LCD couldn’t enter screensaver status after timeout
- Fixed presence watcher VPK lights off in hold status
- Fixed device didn’t automatically fill related info when saving Boadsoft call log to local phonebook
- Fixed the phone couldn't dial the contacts in the predictive dial list
- Fixed If the NTP server does not respond the device does not try the next IP in the list
- Fixed phone not honoring DHCP option 66
- Fixed the default firmware Upgrade via mode should be HTTPS not TFTP after clicking reset
- Fixed VLAN DHCP does not take effect in only Option 43 of the environment
- Fixed UCM Detect didn't work
- Fixed Accounts and VPKs disappeared after setting Keypad Menu mode
- Fixed LCD displayed and skipped abnormally after switching language
- Fixed web was not locked out after five login failure
- Fixed failed to login SSH
- Fixed device registered failed after enabling 'Validate Certificate Chain'
- Fixed the CA certificate cannot be deleted after uploaded on Trusted CA Cert
- Fixed sort of phonebook on web page didn't work
- Fixed Eventlist BLF list should disappear after disabling Auto Provision Eventlist BLFs
- Fixed GXP2130&2135 lack Screensaver Source option on LCD display web page
- Fixed There is no Save and Apply button on EXT web page
- Fixed VPK displayed abnormally after switching page then pressing lines in dialing page
- Fixed some action URL did not work
- Fixed web tipped 'Phone is currently busy' if saved changes after cancelling redial
- Fixed G723 Rate default value of Account5/Account6 is wrong after factory reset
- Fixed Account5/Account6 registered status didn't display on Account Status web page
- Fixed Auto-Attended transfer still worked even without enabling the feature
- Fixed support to stop Screensaver when VPK is active
- Fixed the volume was wrong after switching audio channel at the CALLING screen
- Fixed SCA Call-info call termination does not show active state on second DUT
- Fixed LCD didn't skip after EXT speed Dial in Target page.
- Fixed there is no Conference mode in LCD VPK/MPK settings page
- Fixed 0 changed to + if DTMF Delay set with larger value
- Fixed LCD displayed in English and switching language didn't work after factory reset
- Fixed if VPK using call park, even if it subscribes failed, we should still support dial out
- Fixed edit and Dial window disappeared after pressing some keys
- Fixed the busy tone was abnormal after far-end and the call
- Fixed device did not play key/DTMF tone at Dialing/Call screen
- Fixed VPKs in HF line page didn't work
- Fixed public mode login window displayed abnormally
- Fixed Account1 register abnormally after enabling Delay Registration
- Fixed LCD displayed abnormally when came call to non-Account1 in ForwardAll page
- Fixed phone answer paging call even if custom call-info is configured
- Fixed Password Length and DTMF Delay displayed abnormally if values were out of range
- Fixed users couldn't download devices' screenshot pictures
- Fix issue of wrong LLDP VLAN ID being used by phone for leaving and phone's Ethernet VLAN interface not getting removed when VLAN ID from network switch LLDP packet is greater than 255
- Changed "Local Call Log" to be "Local Call History"
- Fixed Monitored Call Park VPK displayed abnormally after pickup then ending call
- Fixed Auto Provision Eventlist BLF must be filled with EXT field from XML file sent by Broadsoft server
- Fixed VPK cannot reset value and description fields via config file
- Fixed BLF MPK didn’t turn off after Reset web page
- Fixed Chinese tooltip for Local SIP Port is wrong
- Fixed device worked abnormally after using random port
- Fixed click-to-dial work abnormally in Click-To-Dial disabling status
- Fixed weather didn’t work
- Fixed idle LCD brightness displayed without icon
- Fixed LCD displayed abnormally after pressing XML VPK in call
- Fixed LCD didn’t display UCM conference CEI info
- Fixed LCD displayed abnormally in pickup call page after parking call
- Fixed audio disappeared and no sound if back to home then adjusted volume in call
- Fixed LCD displayed abnormally after switching pages in Transfer/CONF
- Fixed callee Request Timer didn't work
- Fixed Blind transfer recovery feature have some issues
- Fixed LCD tipped “System Error: CSS Error” in talk
- Fixed device can’t get the weather information after disable/enable weather
- Fixed if didn’t registered account, web page phonebook click-to-dial display error
- Fixed device worked abnormally after switching calls in Random RTP port mode
- Fixed Auto Provision Eventlist BLFs failed after re-register the account
- Fixed NAPTR/SRV mode in DNS worked abnormally
- Fixed after disabling weather and currency phone still performs DNS query for yahoo
- Fixed Line keys and VPKs couldn’t be modified through config file
- Fixed LCD displayed abnormally in pickup call page after parking call
- Fixed the very first LLDP packet (with TTL=0) not getting sent out
- Fixed device does not send IP address in LLDP chassis but MAC address
- Fixed Device used wrong account to predictive dial in HF dialing page
- Fixed there was no Bluetooth phonebook on contacts
- Fixed call history group on web and LCD are not the same
- Fixed LCD didn’t update in time when call history are clear from web page
- Fixed missed call icon didn’t disappear after web page delete records
- Fixed contacts search all feature interface jump error caused search failed
- Fixed the phone didn’t use default port: 80 when the http proxy URL didn’t include port value
- Fixed LCD does not prompt whether the input of HTTP(S) ID&PW is correct or wrong
- Fixed BLFs take long to recover after network outage
- Fixed LCD did not display error message when self-defined city code is invalid
- Fixed phone sends multiple DTMF tones when in-audio method
- Fixed LCD brightness displayed wrong if came call in Appearance page
- Fixed the capture store in USB didn’t take effect
- Fixed phone doesn’t reset Nonce count when authentication is required during registration
- Fixed not sending SSL certificate when wallpaper download
- Fixed Eventlist BLFs of non-related account disappeared after unregistering account
- Fixed BLF MPK on the last line didn’t display status after running on/off handsfree mode
- Fixed “Check new firmware only when F/W pre/suffix changes” feature didn’t work
- Improved call screen switching performance

About VoIP Phone Updates:

Firmware updates for VoIP Phones are very important as they usually contain many bug fixes, add new features and updates, as well as add additional security features.

One of the main problems users come across when attempting to upgrade their VoIP Phone is that their device may be locked to a certain Carrier. Adding an unlocked version of the firmware may cause the device to stop working on certain networks. This operation may void your carrier warranty and, as such, is not recommended.

Before downloading, make sure that you have selected the appropriate firmware for your device and that the update supports the VoIP service provider you use.

Generally, it is important to upgrade older firmware in sequence (v1 to v2 to v3) and so on, because many manufacturers don’t launch standalone update packages.

Although using beta release firmware packages is tempting, it can prove to be quite risky as well. If you choose to try beta release updates, please read the detailed firmware notes and make sure that you have the possibility to revert to an older and more stable version in case the beta turns out faulty.

If you feel that this update can improve the functionality of your VoIP Phone, please use the download button and follow the installation instructions.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Grandstream Drivers