PCI-DB.com
  1. Driver
  2. Network Card
  3. D-Link DCS-2310L Rev.A2 IP Camera Firmware 1.08.03

D-Link DCS-2310L Rev.A2 IP Camera Firmware 1.08.03 Download

Posted at December 24, 2024 by PCI-DB Team

Install Driver Automatically
Device NameD-Link DCS-2310L Rev.A2 IP Camera Firmware 1.08.03
CategoryNetwork Card
ManufacturerDLINK
File Size14.1 MB
Supported OSOS Independent

D-Link DCS-2310L Rev.A2 IP Camera Firmware 1.08.03 Description

New features:

1. Updated mydlink agent to v2.1.0-b04
2. Support UID feature
3. Add support new anti-brute force mechanism(block only IP, reset when successful login from one IP)
4. Update OpenSSL library to version 1.0.1t.
5. Add Chrome Bowser notify message. 6. Support TLS v1.1/1.2

Problems Fixed:

1. F Fixed the Search Security Lab issue - stack-based buffer overflows were present in adduser.cgi.
2. Fixed D-Lab bug for "RTSP authentication on the DUT was disabled after load a configuration file that created in first formal firmware."
3. Update D-Link Support Page URL to "www.dlink.com".
4. Fixed the D-Lab bug - Windows Media Player didn't list any recording file of DUT SD card, and disable the UPnP AV functionality.
5. Fixed bug of Start recording and plug-out SD Card, Recording icon don't disappeared.
6. Fixed the OpenSSL version several security issue - CVE-2016-2107, CVE-2016-2105, CVE-2016-2106, CVE-2016-2109, CVE-2016-2176.
7. Modify timeout time of get snapshot information.
8. Fixed bug for "uploaded 0KB motion detection video clips to the SD card, when SD card is full."
9. Fixed bug for "Couldn't login web UI form WAN when DUT PPPoE connected."
10. Fixed bug for "DUT wouldn't update its PPPoE public IP to DDNS server."
11. Fixed bug for "There is no recording file after click recording button in DUT LIVE VIDEO page."
12. Fixed bug for "DUT couldn't go to the preset in the LIVE VIDEO page." 13. Fixed bug for "Test the FTP server DNS-340L was added by motion detection setup wizard is error."
14. Fixed bug for "Test the Email server was added by motion detection setup wizard is error."
15. Fixed bug of Wireless Connectivity Issue.
16. Fixed DUT can't use Firefox and Chrome go to web GUI through "advanced" setting.(New CSRF)
17. Fixed bug of "the header section the line end is "LFLFCR" (0d0d0a), then destroy the E-Mail layout."
18. Fixed the Cross-Site Request Forgery issue (CSRF UI close, and default value is enable) and CSRF referrer bug.
19. Modify CSRF protection - 403 Forbidden warning string would response "The request is forbidden".
20. Fixed DUT don't rebuild HTTPS private key and certification when system factory default.
21. Fixed shutter settings issue for support anti-flicker series.
22. Closed unknown hidden TCP ports 1010.
23. Fixed IE11 Live page cannot click recording and snapshot function issue for Win8.1 or higher version issue.
24. Fixed Curl-SMTP - mail server SMTP authentication fail.
25. Fixed Curl-SMTP - the "new mail client" in all cameras with "event management" is not RFC 2821 conform issue.
26. Fixed Curl-SMTP - Mail/SAMBA password bug in test mode fail.
27. Fixed bug of https LED/OSD on/off value cannot be save.
28. Fixed event motion delay time = 0 or 1, then real delay time of value would always = 2.
29. Fixed "when motion detection pre-event = 0 second, then the first frame will not record" issue.
30. Fixed bug of SD card of the re-write function value cannot be save, when enable portal schedule record.
31. Disable SSH connection function from 2014/5/22 after the FW release. 32. Fixed Cross Site Scripting(XSS) issue - 2015/10/26 report by Onward Security.
33. Fixed the Safari browser cannot show ”Image Setup" page information. 34. Modify the IR Light default at maximum level.

Installation steps:

1. Download the firmware. The file is in .bin file format.
2. Log-in camera web UI and enter setup/Maintenance/Firmware upgrade
3. Click Browse… and specify the firmware file.
4. Click Upgrade. The camera starts to upgrade and will reboot automatically when the upgrade completes.

About Network Camera Firmware Update:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related DLINK Drivers

DLINK DWA-642 Network Adapter Driver 2.30

Device Type: Network Card File Size: 27.6 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK DWA-130 RevB Driver 2.00

Device Type: Network Card File Size: 9.8 MB Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK DWA-552 Extreme N Network Adapter Driver 1.50

Device Type: Network Card File Size: 28 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK DWA-160 RevB USB Network Adapter Driver 2.20

Device Type: Network Card File Size: 13.4 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK DWA-125 Wireless 150 USB Adapter Driver 1.00

Device Type: Network Card File Size: 13.4 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK WDA-2320 Range Booster Driver 1.20

Device Type: Network Card File Size: 11 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK WNA-2330 Range Booster Driver 1.30 WHQL

Device Type: Network Card File Size: 19.1 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK DWA-130 RevC Driver 1.10

Device Type: Network Card File Size: 11.9 MB Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

DLINK WUA-2340 USB Adapter Driver 1.50

Device Type: Network Card File Size: 10.7 MB Windows 2K ,Windows XP ,Windows Vista ,Windows Vista 64 bit

Install Driver

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.