ECS NFORCE6M-A2 Realtek LAN Driver 5.732.0629.2009 for XP Download

Posted at April 25, 2024 by PCI-DB Team

ECS NFORCE6M-A2 Realtek LAN Driver 5.732.0629.2009 for XP Description

CPU 

Socket AM3 socket for AMD Phenom II processors
High-performance HyperTransport 1.0 CPU Interface
Support transfer rate up to 2000 mega-transfers per sencond

CHIPSET

NVIDIA GeForce 6100/nForce 430

MEMORY

Dual-channel DDR3 memory architecture
4 x 240-pin DDR3 DIMM socket support up to 32GB*
Support DDR3 1333/1066/800 SDRAM
*(Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 8GB)
*(Due to AMD CPU spec limitation, please refer to Memory QVL for more information)

EXPANSION SLOT

1 x PCI Express x16 Gen2.0 slot
1 x PCI Express x1 slot
3 x PCI slots

STORAGE

Support by NVIDIA GeForce 6100/nforce 430
 2 x Ultra DMA133/100/66 devices
 4 x Serial ATAII 3.0Gb/s devices
RAID0, RAID1, RAID0+1, RAID5 configuration

AUDIO

Realtek ALC662 6-channel HD audio CODEC
Compliant with HD audio specification

LAN

Realtek RTL8111DL Gigabit Lan

REAR PANEL I/O

1 x PS/2 keyboard & PS/2 mouse connectors
1 x Serial port (COM1)
1 x RJ45 LAN connector
1 x Audio port (Line-in,Line-out,Mic-out)
4 x USB ports

INTERNAL I/O CONNECTORS & HEADERS

1 x 24-pin ATX Power Supply connector
1 x 4-pin ATX 12V connector
1 x 4pin CPU_FAN connectors
1 x 3-pin SYS_FAN connector
1 x IDE connector
1 x FDD connector
1 x Speaker header
1 x Front panel switch/LED header
1 x Front panel audio header
1 x SPDIF out header
1x CD in header
4 x Serial ATA connectors
3 x USB 2.0 headers support additional 6 USB ports

SYSTEM BIOS

AMI BIOS with 8Mb SPI Flash ROM
Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
Audio, LAN, can be disabled in BIOS
F11 hot key for boot up devices option

FORM FACTOR

ATX Size, 305mm*210mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers