Gigabyte GA-G31-S3G (rev. 1.0) Intel Chipset Driver 8.3.1.1009 Download

Posted at November 21, 2024 by PCI-DB Team

Gigabyte GA-G31-S3G (rev. 1.0) Intel Chipset Driver 8.3.1.1009 Description

CPU

1. Support for an Intel Core 2 Extreme processor/ Intel Core 2 Quad processor/ Intel Core 2 Duo processor/ Intel Pentium processor Extreme Edition/Intel Pentium D processor/ Intel Pentium 4 processor Extreme Edition/Intel Pentium 4 processor/ Intel Celeron processor in the LGA 775 package
2. L2 cache varies with CPU

Front Side Bus   

1. 1333/1066/800 MHz FSB

Chipset   

1. North Bridge: Intel G31 Express
2. South Bridge: Intel ICH7

Memory   

1. 2 x 1.8V DDR2 DIMM sockets supporting up to 4 GB of system memory
2. Dual channel memory architecture
3. Support for DDR2 1066/800/667 MHz memory modules
* Please refer "Memory Support List" for memory support information.

Audio   

1. Realtek ALC662 codec
2. High Definition Audio
3. 2/4/5.1-channel
4. Support for S/PDIF Out
5. Support for CD In

LAN

1. RTL 8111C chip (10/100/1000 Mbit)

Expansion Slots

1. 1 x PCI Express x16 slot
2. 3 x PCI Express x1 slots
3. 3 x PCI slots

Storage Interface

South Bridge:
1. 1 x IDE connector supporting ATA-100/66/33 and up to 2 IDE devices
2. 4 x SATA 3Gb/s connectors supporting up to 4 SATA 3Gb/s devices

iTE IT8718 chip:

1. 1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB   

1. Integrated in the South Bridge
2. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors   

1. 1 x 24-pin ATX main power connector
2. 1 x 4-pin ATX 12V power connector
3. 1 x floppy disk drive connector
4. 1 x IDE connector
5. 4 x SATA 3Gb/s connectors
6. 1 x CPU fan header
7. 1 x system fan header
8. 1 x front panel header
9. 1 x front panel audio header
10. 1 x CD In connector
11. 1 x S/PDIF Out header
12. 2 x USB 2.0/1.1 headers
13. 1 x chassis intrusion header
14. 1 x power LED header

Back Panel Connectors

1. 1 x PS/2 keyboard port
2. 1 x PS/2 mouse port
3. 1 x parallel port
4. 1 x serial port
5. 1 x D-Sub port
6. 4 x USB 2.0/1.1 ports
7. 1 x RJ-45 port
8. 3 x audio jacks (Line In/Line Out/Microphone)

I/O Controller   

1. iTE IT8718 chip

H/W Monitoring   

1. System voltage detection
2. CPU temperature detection
3. CPU/System fan speed detection
4. CPU overheating warning
5. CPU/System fan fail warning
6. CPU fan speed control

BIOS   

1. 1 x 4 Mbit flash
2. Use of licensed AWARD BIOS
3. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b

Bundle Software   

1. Norton Internet Security (OEM version)

Operating System

1. Support for Microsoft Windows Vista/XP

Form Factor

1. ATX Form Factor; 30.5cm x 19.4cm

Unique Features   

1. Support for @BIOS
2. Support for Q-Flash
3. Support for Virtual Dual BIOS
4. Support for Download Center
5. Support for Xpress Install
6. Support for Xpress Recovery2
7. Support for EasyTune

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers