ECS A780VM-M3 (V1.0) AMD SB7xx SATA RAID Floppy Driver 3.1.1540.81 Download

Posted at May 16, 2024 by PCI-DB Team

ECS A780VM-M3 (V1.0) AMD SB7xx SATA RAID Floppy Driver 3.1.1540.81 Description

CPU  

AMD PhenomII / Phenom processor (Socket AM2+)
AMD Athlon 64 X2 Dual Core/ Athlon 64 / Sempron processor
High-performance HyperTransport 3.0 CPU Interface
Support transfer rate up to 5200 mega-transfers per second
Note: This board supports CPU up to 95W TDP only; you can refer to AMD website to check your CPU.
AM3 Ready

CHIPSET

AMD780V & AMD SB700
North Bridge: AMD 780V
South Bridge: AMD SB700

GRAPHICS

On Chip (AMD 780V-based with ATI Radeon 3100 graphics )
Integrated DirectX10 graphics processor
Max Dynamic Hyper Memory: 896MB

MEMORY

Dual-channel DDR2 800 memory architecture
2 x 240-pin DDR2 DIMM socket support up to 16 GB*
Support DDR2 1066/800/667/533/400 DDR2 SDRAM
* (Due to the DRAM maximum size is 2GB at present, the memory maximum size we have tested is 4GB)

EXPANSION SLOT

1 x PCI Express x16 slot
1 x PCI Express x1 slot
2 x PCI slots

STORAGE

Support by AMD SB700
 2 x Ultra DMA133/100/66 devices
 6 x Serial ATA 3.0Gb/s devices
 RAID0, RAID1, RAID10 configuration

AUDIO

Compliant with HD audio specification
IDT 92HD202 6-channel audio CODEC

LAN

ATHEROS L2 10/100 Lan Phy

REAR PANEL I/O

1 x PS/2 keyboard & PS/2 mouse connectors
4 x USB ports
1 x Gigabit Ethernet Port
1 x COM Port
1 x Audio port (Line-in, Line-out, Mic-in)
1 x VGA port

INTERNAL I/O CONNECTORS & HEADERS

1 x 24-pin ATX Power Supply connector
1 x 4-pin 12V Connector
CPUFAN/PWRFAN/SYSFAN connectors
2 x USB 2.0 headers support additional 4 USB Ports
1 x Parallel Header
1 x IDE connector
1 x Speaker header
1 x Front panel switch/LED header
1 x Front panel audio header
1 x SPDIF out header
6 x Serial ATA 3Gb/s connectors
1 x CD in header
1 x COM1 header

SYSTEM BIOS

AMI BIOS with 8Mb SPI ROM
Supports Plug and Play, STR/STD, Hardware monitor, Multi Boot, DMI,HDCP
Supports ACPI revision 3.0 specification

FORM FACTOR

ATX Size, 244mm*210mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers