ECS G31T-M7 (V1.0) Atheros L1e Gigabit Ethernet Controller Driver 1.0.0.35 Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	ECS G31T-M7 (V1.0) Atheros L1e Gigabit Ethernet Controller Driver 1.0.0.35
Category	Network Card
Manufacturer	OTHER NETWORK CARDS
File Size	2.5 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit

ECS G31T-M7 (V1.0) Atheros L1e Gigabit Ethernet Controller Driver 1.0.0.35 Description

CPU      
     LGA775 socket for latest Intel Core 2 Quad/Core 2 Duo / Pentium Dual-core (E21xx series)/Celeron 4xx processors
     FSB 1333/1066 MHz

      CHIPSET    
     Intel G31 & ICH7
     North Bridge: Intel G31
     South Bridge: Intel ICH7

      GRAPHICS    
     Integrated Intel Graphics Media Accelerator 3100 (GMA3100)

      MEMORY    
     Dual-channel DDR2 memory architecture
     2 x 240-pin DDR2 DIMM socket support up to 4 GB
     Support DDR2 667/800 MHz Memory

      EXPANSION SLOT    

     1 x PCI Express x16 slot
     1 x PCI Express x1 slot
     2 x PCI slots

      STORAGE    
     Supported by IntelICH7
      2 x Ultra DMA 100/66/33 devices
      4 x Serial ATAII devices

      AUDIO    
     VIA VT1708B 6-channel High Definition audio CODEC

      LAN    
     Atheros AR8112 10/100 LAN

      REAR PANEL I/O    

     1 x PS/2 keyboard & PS/2 mouse connectors
     4 x USB ports
     1 x VGA port
     1 x COM Port
     1 x RJ45 LAN connector
     1 x Audio port

      INTERNAL I/O CONNECTORS & HEADERS    

     1 x 24-pin ATX Power Supply Connector & 4-pin 12V Connector
     1 x FDD connector supports two 360K~2.88MB FDDs
     4 x Serial ATA connectors
     2 x USB 2.0 headers support additional 4 USB Ports
     1 x Clear CMOS header
     1 x Front panel header
     1 x Front panel audio header
     1 x SPDIF out header
     1 x CD in header
     1 x Speaker header
     1 x LPT header

     SYSTEM BIOS    

     AMI BIOS with 4Mb SPI Flash ROM
     Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
     Supports ACPI revision 1.0 specification

      FORM FACTOR    

     Micro-ATX Size, 244mm*200mm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OTHER NETWORK CARDS Drivers