Gigabyte GA-M52L-S3 (rev. 2.0) NVIDIA Chipset Driver 15.00G for Vista Download

Posted at November 21, 2024 by PCI-DB Team

Gigabyte GA-M52L-S3 (rev. 2.0) NVIDIA Chipset Driver 15.00G for Vista Description

CPU

Support for Socket AM2+/ AM2 processors: AMD Phenom FX processor/ AMD Phenom X4 processor/ AMD Phenom X3 processor/ AMD Athlon X2 processor/ AMD Athlon processor/ AMD SempronX2 processor / AMD Sempron processor

Note

If you install AMD AM2+ CPU on AM2 motherboard, the system bus speed will downgrade from HT3.0(5200MHz) to HT1.0(2000 MT/s) spec; however, the frequency of AM2+ CPU will not be impacted. Please refer "CPU Support List" for more information.

Front Side Bus   

2000 MT/s

Chipset   

NVIDIA nForce 520LE (Geforce 6100/nForce 430)

Memory

4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1)
Dual channel memory architecture
Support for DDR2 800/667/533/400 MHz memory
(Refer to "Memory Support List" website for the latest memory support list.)

Audio

Realtek ALC883 codec
High Definition Audio
2/4/5.1/7.1-channel (Note 2)
Support for S/PDIF In/Out
Support for CD In

LAN

RTL 8201CL chip (10/100 Mbit)

Expansion Slots   

1 PCI Express x 16 slot
2 PCI Express x 1 slot
4 PCI slots

Storage Interface

NVIDIA nForce 520LE(Geforce 6100/nForce 430) chipset:
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
2 x SATA 3Gb/s connectors supporting up to 2 SATA 3Gb/s devices
Support for SATA RAID 0 and RAID 1

iTE IT8716 chip:

1 x floppy disk drive connector supporting up to 1 floppy disk drive

USB

Integrated in the NVIDIA nForce 520LE (Geforce 6100/nForce 430) chipset
Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)

Internal I/O Connectors   

1 24-pin ATX main power connector
1 4-pin ATX 12V power connector
1 floppy disk drive connector
1 IDE connectors
2 SATA 3Gb/s connectors
1 CPU fan connector
1 system fan connector
1 front panel connector
1 front panel audio connector
1 CD In connector
1 SPDIF In connector
1 SPDIF Out connector
2 USB 2.0/1.1 connectors
1 Chassis Intrusion connector
1 Power LED connector

Back Panel Connectors   

1 PS/2 keyboard port
1 PS/2 mouse port
1 parallel port
1 coaxial S/PDIF Out port
1 COM A port
4 USB 2.0/1.1 ports
1 RJ-45 port
6 audio jacks(Center / Subwoofer Speaker Out / Rear Speaker Out / Side Speaker Out / Line In / Line Out / Microphone)

I/O Controller   

iTE IT8716 chip

H/W Monitoring   

System voltage detection
CPU / System temperature detection
CPU / System fan speed detection
CPU / System overheating warning
CPU / System fan failure warning
CPU / System fan speed control (Note 2)

BIOS

1 4Mbit flash ROM
Use of licensed AWARD BIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b

Unique Features   

Supports for @BIOS
Supports Download Center
Supports Q-Flash
Supports EasyTune (Note 3)
Supports Xpress Install
Supports Xpress Recovery2
Supports Virtual Dual BIOS

Bundle Software   

Norton Internet Security (OEM version)

Operating System

Support for Microsoft Windows Vista/ XP

Form Factor   

ATX form factor; 30.5 cm x 21.5cm

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers