D-Link DCS-855P rev.A1 Baby Monitor Firmware 1.01.03 Download

Posted at November 2, 2024 by PCI-DB Team

D-Link DCS-855P rev.A1 Baby Monitor Firmware 1.01.03 Description

New Features:

- Update mydlink Agent to 2.0.19-B05
- Support UTF-8 Unicode format for SD card music playback.
- Support new Bonjour service type “_dcamera._tcp”.
- Change the default system time for year 2015.
- Refine the firmware version naming definition.
- Remove all web-page, except RAM page.
- Lower the Day/Night mode switching threshold after firmware upgrade.
- Update the time zone table for Russian and Chile.
- Recording file naming supports multi events.
- Remove Bonjour server of “_http._tcp”.
- Shorten the flash writing interval from 30 seconds to 10 seconds.

Problems Fixed

- Fix the POODLE security vulnerability by disable SSLv3.
- Fix following vulnerabilities of Onward security test.
OnSec-VUZ-103-48001, TLS/SSL Server Supports Weak Cipher Algorithms
OnSec-VUZ-103-48002, OpenSSL CCS Injection
OnSec-VUZ-103-48008, music_stop.cgi Unauthenticated Access
OnSec-VUZ-103-48009, sdcard_music_list.cgi Unauthenticated Access
OnSec-VUZ-103-48010, sdcard_upload.cgi Unauthenticated Access
OnSec-VUZ-103-48011, sys_music_list.cgi Unauthenticated Access
OnSec-VUZ-103-48012, sys_music_play.cgi Unauthenticated Access

Upgrading Instructions:

The notification of FW upgrade will be automatically delivered on mydlink portal and mydlink Baby Camera Monitor app when there is a new FW release. The camera will start upgrading to the new FW after users confirm to update.

About Network Camera Firmware:

Updating to a newer firmware version than the one already installed on your network camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty, or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

Changing the camera’s firmware must be performed when the new release resolves an issue that your device has encountered or adds a new feature (or enhances an existing one) that could prove useful to you.

As for the installation method, the steps vary depending on the model you own, but basically, you must connect your camera via an Ethernet cable (username and password required), and use the downloadable file in the Firmware Update section to upgrade your device. Make sure you do not interrupt the installation process.

However, make sure you carefully read and understand the installation steps so that you don’t end up with a broken device. This process isn’t intended to be destructive, but still, it’s best to save all configurations before applying a different firmware.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related D-Link Drivers