Intel S1200V3RPL Server Board EFI Firmware 03.03.0006 Download

Posted at December 21, 2024 by PCI-DB Team

Intel S1200V3RPL Server Board EFI Firmware 03.03.0006 Description

Versions:

- BIOS: R03.03.0006
- ME: R03.00.07.024
- BMC: 01.18.9983
- FRUSDR: 1.08

BIOS Changes in R03.03.0006:

- NOTICE: Capsule update method: If previous BIOS version is R02.02.0004 and earlier version, need use E3-1200 V3 CPU part boot to EFI shell, and use capsule files update BIOS to R03.03.0006 and update ME to 3.0.7.24,then replace with E3-1200 V4 CPU part to power on.
- EPSD100254574: SUT power on failed after shut down from OS.

ME Changes in 03.00.07.024:

- Fixed: Platform does not go to S3/S4 state in recovery mode
- Fixed: Wrong value returned from Get Max Allowed Logical Processors command after S0->(S4,S3)->S0 transition

BMC Changes in 01.18.9983:

- Fixed: Cannot set "Alert Destination IPV6 Address" use "syscfg /lacipv6 1 1 1111:2222:3333:4444:5555:6666:7777:8888 Enable 1 10" where "Alert Destination Index is not '0

FRUSDR Changes in release 1.08

- Fixed: The sensor reading of P1 MTT is always 0 in EWS(Intel Integrated BMC Web Console)

UEFI iFlash32 Installation:

1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS.CAP file to a USB Flash Drive ( Do not use the *Rec.CAP file as it will clear the NVRAM) Notes: It is recommended to copy full package
3. Map the respective storage device in the system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility at the prompt fs0:> IFlash32 [File Name] /u /ni
6. Either reboot the system and Go into BIOS setup <F2>, reset defaults <F9> and save <F10> or After the BIOS update and before rebooting, run: fS0:> Iflash32 -rd
7. Reboot the system

Backup BIOS update instructions:

1. Boot the system to EFI Shell
2. Copy IFlash32.efi, ipmi.efi and BIOS .CAP file to a USB Flash Drive ( Do not use the Rec.CAP file as it will clear NVRAM). Notes: It is recommended to copy full package
3. Map the respective storage device in system with the command Shell> map -r
4. Change the Shell to mapped device file system. Example: Shell> fs0: (or fs1:)
5. Run the IFlash32 utility on the prompt fs0:> IFlash32 -u [File Name] UpdateBackupBios -ni
6. It will update primary BIOS with processed capsule, and the backup BIOS update will be completed in next normal boot.
7. Reboot the system.

About ME Firmware:

If you wish to apply this ME (Management Engine) Firmware version, you should first make sure that the version number matches your AMT (Active Management Technology) family, as each update is specifically developed for certain system configurations.

While this technology is mostly associated with enterprises, it can also be used by various IT administrators as well as regular users. However, bear in mind that even though other platforms might also be compatible, we do not recommend installing this release on OSes other than the specified ones.

In order to apply this package, it would be best if you carefully read and understand the instructions provided by your computer manufacturer, and perform the update only when you have completely familiarized yourself with the steps.

In addition to that, make sure you perform a system reboot after upgrading the firmware version in order to allow all changes to take effect properly.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

Still, regardless of the method used or whether the upgrade is performed by a regular or power user, it’s recommended that the new BIOS be applied in a steady power environment such as the one ensured by a UPS unit.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

Bear in mind that failing to perform a successful installation could seriously damage your device, and the faulty BIOS resulted from the process might even render it unusable.

So, if this release includes useful changes, hit the download button, get the package, and update your BIOS version. Otherwise, check with our website as often as possible, so that you don’t miss the release that you need.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers