Shuttle SG31G2 XPC USB Patch Driver Download

Posted at November 2, 2024 by PCI-DB Team

Shuttle SG31G2 XPC USB Patch Driver Description

Fixes:

To modify USB devices become disable after restart from Intel chipset driver installation.

FORM FACTOR
Shuttle Form Factor

PROCESSOR

Intel Core 2 Quad Core 2 Duo,Dual-Core,Celeron 400 serial support
FSB 800/1066/1333*MHz support
(*Native support)

CHIPSET

Intel G31 + ICH7

MEMORY

2 x 240 pin DDR2 DIMM slots,2GB per DIMM (Max 4GB)
Dual Channel DDR2 667/800

VGA

Built-in Intel GMA 3100 256bit 3D engine with a powerful 400MHz core and DirectX 9.0
Dynamic Video Memory Technology 3.0 supports up to 384MB of video memory

AUDIO

Realtek ALC888
7.1 channel High Definition Audio support Digital S/PDIF in/out

ETHERNET

Marvell 88E8056
IEEE 802.3u 100Base-T specification revision 1.0
100Mb/s and 1Gb/s operation
Support Wake-On-LAN function

IEEE1394 (FireWire)

TI TSB43AB22A
Complies with 1394 OHCI specification revision 1.0
Support 400Mb/s,200Mb/s,100Mb/s transfer rate

STORAGE INTERFACE

(3) 3.0Gb/s bandwidth SATA II
(1) Ultra DMA/100 IDE channel
(1) Floppy

ONBOARD CONNECTORS

(3) SATA connectors
(1) ATA100 bus IDE connector
(2) 1x5 pin USB 2.0 header
(1) Floppy connector
(1) ATX main power connector
(1) ATX 12V power connector
(1) set 4pin fan connectors
(1) set 3pin fan connectors

FRONT PANEL

(2) UBS 2.0 ports
(1) mini IEEE 1394 port
(1) Microphone-In
(1) Earphone-Out
Power-On button
Reset button
Power LED
HDD LED

BACK PANEL

(1) PCI-E x16 slot
(1) PCI slot
(1) RJ45 Gigabit LAN port
(1) D-sub VGA port
(1) DVI-D VGA port
(4) USB 2.0 ports
(1) PS/2 keyboard port
(1) PS/2 mouse port
(1) Line-in port
(1) Front out port
(1) Side Surround out port
(1) Rear Surround out port
(1) Center/Bass port
(1) IEEE1394 port
(1) Clear CMOS button
(1) Printer port fixture
(1) Wireless Antenna fixture

EXPANSION BAY

(2) 3.5' bay
(1) 5.25' bay

DIMENSIONS

300(L) x 200(W) x 185(H) mm
POWER    250W
Input:100-240V AC
Dimensions:190(L) x 82(W) x 43(H) mm

ACCESSORIES

XPC Multilanguage Quick User Guide
XPC CD Driver (XP and Vista 32 / 64 bit)
1* Power cord
1* IDE cable (pre-install)
1* SATA cable (pre-install)
1* Floppy cable
Screws
Heatsink Compound

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers