Gigabyte GA-B85N (rev. 1.1) Intel Management Engine Driver 9.5.15.1730 Download

Posted at November 2, 2024 by PCI-DB Team

Gigabyte GA-B85N (rev. 1.1) Intel Management Engine Driver 9.5.15.1730 Description

Specifications:

- CPU
Support for Intel Core i7 processors/Intel Core i5 processors/ Intel Core i3 processors/Intel Pentium processors/ Intel Celeron processors in the LGA1150 package
L3 cache varies with CPU

- Chipset
Intel B85 Express Chipset

- Memory
2 x 1.5V DDR3 DIMM sockets supporting up to 16 GB of system memory
Dual channel memory architecture
Support for DDR3 1600/1333 MHz memory modules
Support for non-ECC memory modules
Support for Extreme Memory Profile (XMP) memory modules

- Onboard Graphics
Integrated Graphics Processor:
1 x DVI-I port, supporting a maximum resolution of 2560x1600
1 x HDMI port, supporting a maximum resolution of 4096x2160
Support for HDMI 1.4a version.
Maximum shared memory of 1 GB

- Audio
Realtek ALC898 codec
High Definition Audio
2/4/5.1/7.1-channel
Support for S/PDIF Out

- LAN
Intel GbE LAN chip (10/100/1000 Mbit)

- Expansion Slots
1 x PCI Express x16 slot, running at x16
1 x mini-PCI Express slot for the wireless communication module

- Storage Interface
Chipset:
3 x SATA 6Gb/s connectors (SATA3 0~2)
1 x SATA 3Gb/s connector (SATA2)
1 x mSATA 6Gb/s connector

- USB
Chipset:
4 x USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
7 x USB 2.0/1.1 ports (5 ports on the back panel, 2 ports available through the internal USB header)

- Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 4-pin ATX 12V power connector
3 x SATA 6Gb/s connectors
1 x SATA 3Gb/s connector
1 x mSATA 6Gb/s connector
1 x CPU fan header
1 x system fan header
1 x front panel header
1 x front panel audio header
1 x S/PDIF Out header
1 x USB 3.0/2.0 header
1 x USB 2.0/1.1 header
1 x serial port header
1 x chassis intrusion header
1 x Clear CMOS jumper

- Back Panel Connectors
1 x PS/2 keyboard/mouse port
1 x DVI-I port
1 x HDMI port
2 x Wi-Fi antenna connector holes
2 x USB 3.0/2.0 ports
5 x USB 2.0/1.1 ports
1 x RJ-45 port
1 x optical S/PDIF Out connector
5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Line In, Line Out, Mic In)

- I/O Controller
iTE I/O Controller Chip

- H/W Monitoring
System voltage detection
CPU/System temperature detection
CPU/System fan speed detection
CPU/System fan speed control

- BIOS
2 x 64 Mbit flash
Use of licensed AMI UEFI BIOS
Support for DualBIOS
PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers