Panasonic H-FS14140 Lens Firmware 1.2 Download

Posted at November 4, 2024 by PCI-DB Team

Panasonic H-FS14140 Lens Firmware 1.2 Description

Changes:

- Dual I.S.2 is available by this firmware update (in case of the usage of Camera with this function)

Installation Instructions:

- Download and unzip the file for update.
- Copy the extracted firmware onto an SD memory card.
- Mount the lens onto the camera body.
- Charge the battery fully.
- Make sure to turn off the power switch.
- Insert the fully charged battery to the body.
- Insert the SD Memory Card into the Camera body.
- Turn on the power switch.
- Press the Play button to enter the Play mode.
- After the message of "PLEASE WAIT ..." is displayed, press the Up button to select Yes. The update process will start.
- The firmware update will take about 2 to 3 minutes.
- Once the firmware update process is completed, the camera body will turn off the power and turn on again then it will be initial mode automatically.
- Turn off the power switch.
- Remove the SD memory card.

Please do not attempt the following operations:

- Turning the power off and on
- Pressing any buttons
- Opening the SD memory card compartment
- Removing the SD memory card
- Removing the lens or the Mount Adaptor
- Removing the AC adaptor cord
- Removing the DC cable

About Lens Updates:

Upgrading or downgrading your lens to a different firmware version might enhance the unit’s overall performance and stability, and could also improve some of the lenses’ features (a good example would be faster autofocus speed).

In order to apply a firmware properly, other than the one already installed, you should check that the lenses are connected to the camera body, copy the compatible update on a memory card, and insert it into the camera.

From the device’s menu, browse to the Firmware Upgrade section, and enable the new firmware. Since each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, you must make sure that you read the product’s installation guide.

Therefore, if you consider installing this present release, click on the download button to get the firmware, and apply it. Moreover, don’t forget to check our website constantly so that you don’t miss any of the future versions.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers