Panasonic AK-UCU600MS Camera Control Unit Firmware 01.04 Download

Posted at December 22, 2024 by PCI-DB Team

Panasonic AK-UCU600MS Camera Control Unit Firmware 01.04 Description

Changes:

- Support for connectivity with AK-UC3000/UC3000S. Able to switch between connected cameras using the menu. Supported are only the functions installed in the AK-UC3000/UC3000S.
- Support for 3G-SDR output in HDR mode (Menu item added)

Versions:

- SOFTWARE: 01.00-000-03.10
- NETWORK: 01.00-
- UHD FPGA: 01.02-
- HS FPGA: 01.02-
- RETURN FPGA 1: 03.09-
- RETURN FPGA 2: 03.03-
- MAIN FPGA: 01.04-
- ICOM FPGA: 03.01-00-01.00
- USC FPGA: 01.05-

Version display method:

- Each software version can be confirmed at item “VERSION” in MAINTENANCE menu.
- Connect the picture monitor to [8/PM] of HD/SD SDI OUT connector.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select “VERSION” and pressing the SELECT dial button, VERSION screen is displayed.
- Each software version is displayed on the VERSION screen.

Update procedure:

- Download and unzip the archive.
- Copy the “PRIVATE” folder onto a formatted SD memory card
- Connect the picture monitor TV to [8/PM] of HD/SD SDI OUT connector.
- Insert an SD memory card into the SD memory card slot.
- Hold down the MENU button. The TOP menu screen of CCU menu appears and the MENU button lights.
- Select “MAINTENANCE” and press the SELECT dial button to open the MAINTENANCE menu screen.
- Select item “SD CARD” and press the SELECT dial button to open the SD CARD menu screen
- Select the item “UPDATE” and set “YES?”(Character is blink).
- Press the SELECT dial button, the update program is started.
- The software update may take approx. 40 minutes. Do not power down while updating
- When the update is completed, the message “UPDATE COMPLETE” is displayed and CCU will be automatically rebooted

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider applying the new firmware, even if you are a power user.

If you try to perform the update without knowing all the steps, you risk ending up with a broken device. However, what every upgrade needs is a compatible firmware to be transferred to the adapter (or to the camera) via either a USB cable or a suitable memory card.

That being said, if you consider applying this release and have made sure you're properly informed on the process of performing the upgrade successfully, hit the download button, and update your camera adapter.

Check with our website as often as possible in order to be up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Panasonic Drivers