LSI Logic SAS 1068e Controller Firmware 1.18.10.00 (B1)/1.25.03.00 (B3) Fix 11810/12503 Rev.A Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	LSI Logic SAS 1068e Controller Firmware 1.18.10.00 (B1)/1.25.03.00 (B3) Fix 11810/12503 Rev.A
Category	Firmware
Manufacturer	Others
File Size	1.1 MB
Supported OS	Windows All

LSI Logic SAS 1068e Controller Firmware 1.18.10.00 (B1)/1.25.03.00 (B3) Fix 11810/12503 Rev.A Description

This package contains an upgrade for the LSI Logic SAS 1068e Controller Firmware for the supported workstation models and operating systems. This package upgrades the firmware for the B1 chip to version 1.18.10.00 and for the B3 chip to version 1.25.03.00.

ENHANCEMENTS:

N/A

FIXES:

- Fixes an issue where there is a possible loss of data when a SAS expander (also know as JBOD) that is attached to an HP xw9400 Workstation is in the process of transferring data from the expander, and the expander is power cycled.

PREREQUISITES:

N/A

INSTALLATION INSTRUCTIONS:

1. Download the file by clicking the "Download" or "Obtain Software" button and saving the file to a folder on your hard drive (make a note of the folder where the downloaded file is saved).

2. Double-click the downloaded file and follow the on-screen instructions. Note the location where the SoftPaq contents are extracted (the default is C:SWSETUPSP43998).

UPDATING THE FIRMWARE:

To update the firmware, complete the following steps:

1. Copy the contents extracted from the downloaded file to a DOS or FreeDOS bootable diskette (floppy) or USB key.

2. Ensure that the bootable diskette or USB key is in the drive, and boot the workstation to the diskette or USB key.

3. Execute the file "SAS9400B.bat" to update the firmware to 1.18.10.00 (B1 LSI1068e) or 1.25.03.00 (B3 LSI1068e) into the SAS Flash.

4. Once the firmware has been updated, the system should be powered cycled. Remove the floppy diskette or USB key prior to power up.

5. During the Power-On Self-Test (POST), notice that the LSI SAS1068e Option ROM is 6.12.00.00 and the firmware version is 1.18.10.00 (B1 LSI10678e) or 6.22.00.00 and the firmware version is 1.25.03.00 (B3 LSI1068e).

NOTE:

After the installation is complete, the download directory, which contains the extracted SoftPaq files, can be deleted, if desired.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers