OPPO BDP-105 Blu-ray Disc Player Firmware BDP10X-67-1204 Download

Posted at December 27, 2024 by PCI-DB Team

OPPO BDP-105 Blu-ray Disc Player Firmware BDP10X-67-1204 Description

Special Notice:

- Once this firmware version is installed on the player, you will not be able to revert back to any previous official or public beta firmware. There will be no problem upgrading to any future official or beta firmware release.
- Due to the extensive changes in this major firmware update, it is required that the user performs a "Reset Factory Defaults" operation after the firmware is installed. Please write down your special settings before doing this, and remember to re-apply your settings and adjust the proper volume level (if applicable) before you play any content. You may experience stability issues if this step is not performed.
- Even though this firmware provides functionality similar to a pre-amplifier, we recommend that you use caution when connecting the Multi-channel or Stereo audio outputs directly to your amplifier and speakers.
- This Official firmware is designed to work with new versions of Apple iOS and Android media control applications, which add new features like SMB access, album art display, media category support, and the ability to share information to mainstream social network websites. The MediaControlHD V2.0 (for iPad and iPad mini) is already in the App Store, and another version for the iPhone, as well as a corresponding Android app, will be available shortly.

Comparing to the previous Official release version BDP10X-60-0910 (which is essentially the same as BDP10X-58-0719 release), the major changes included in this version are:

- Added the "Power On Volume" and "Maximum Volume" selections for the Multi-channel and the Stereo (BDP-105 only) audio outputs. Both selections are available at the Setup Menu -> Audio Processing.
- Added the "Power On Input" selection which allows the customer to decide which input source should be used when the player powers on. This selection is available at the Setup Menu -> Playback Setup.
- Added the "Settings Management" selection which allows the customer to backup or restore the player’s settings. This selection is available at the Setup Menu -> Device Setup. A USB flash drive is required for this purpose, and the backup file is encrypted to only allow access from OPPO Technical Support.
- Added the “4Kx2K Output” selection to Setup Menu -> Video Setup with two settings: “Auto” and “Forced”. The “Auto” setting will upscale 24 Hz content to 4K if the connected display supports a 4K input. The “Forced” setting will output a 4K signal regardless of whether or not the player detects a 4K display and irrespective of the original source format.
- Added the "Auto" mode when choosing the SACD output audio format. This mode is available at the Setup Menu -> Audio Format Setup -> SACD Output.
- Added support for automatic file and folder sorting when accessing SMB servers. The files and folders are now sorted in alphabetic order.
- Added support for MKV files with PGS subtitles.
- Added Zoom functionality to video content sent through the HDMI IN ports.
- Upgraded the "CinemaNow" and "YouTube" applications.
- Improved support for CUE playlists. Now, a single CUE file can point to multiple music files in the same folder.
- Resolved a playback issue with several DVD-Audio discs. Customers reported that after upgrading to the BDP10X-58-0917 firmware, some DVD-Audio discs would play for a few seconds then the player was locked up, and all you heard was white noise. Samples include “Elvis: 30 #1 Hits”, “Bruckner: Symphony No. 7”, “Dream Theater”, “Nightwish: Once”, as well as discs self-authorized using “HD-Audio Solo Ultra” program.
- Resolved a frame rate decoding error for 24 Hz video files. Customers reported that after upgrading to the BDP10X-58-0917 firmware, many MKV, M2TS and TS files which were encoded as 23.976 Hz were decoded as 29.970 Hz. This issue has been resolved.
- Resolved an incorrect audio Downmix issue with the Stereo audio outputs (BDP-105 only). Customers reported that after setting "Stereo Signal" to "Front Left/Right", they could hear surround channel audio from the dedicated Stereo audio outputs. This issue has been resolved.
- Resolved a visible streaking issue observed on the BDP-103D player. Customers reported that after turning on the Darbee processing, they could see streaks or stripes in the background details, which became more obvious after increasing the Darbee level or switching to Full-Pop mode. This issue has been resolved in the official release.
- Resolved a multi-channel DSD support issue when using Dual Display mode. Customers reported that if they connected the HDMI 1 Out to a TV and the HDMI 2 Out to a DSD-capable receiver, the receiver could only recognize the Front Left and Front Right channels even if the players were reading a multi-channel SACD. This issue has been resolved.
- For the BDP-103D player, this firmware added three commands (QDB, SDB and DRB) to the RS-232 protocol for Darbee control. It also provided finer control over the Darbee level adjustment (in 1% increments).
- Added an experimental "Gapless Playback" feature. Currently, this feature only works for WAV and APE music files, and can be enabled in the music file navigation interface by pressing the OPTION button and then selecting the "Gapless Playback" option. In Gapless Playback mode, you may use buttons like PAUSE, PLAY, STOP, NEXT and PREV, but not REV and FWD. This feature is still under development and may be improved in future firmware releases.
- Resolved a compatibility issue with some DVD/BD blank discs. Customers reported that their self-burnt DVD or BD discs failed to load and play on the OPPO players. Samples include Verbatim DVD+R DL 8.5G and BD-R DL 50GB blank discs. This firmware upgraded the software driver for the disc loader and resolved this issue.
- Resolved a compatibility issue with JRiver Media Center software. Customers reported that after installing the latest Public Beta firmware BDP10X-67-1120B, they could no longer see the JRiver's DLNA server in the list of My Network. This issue has been resolved in the official release.
- Resolved a channel mapping error in the DSD file playback, which only happened on BDP-105 players. Customers reported that if they set the "Stereo Signal" to "Front Left/Right", switched off the player then switched it on again, and played 2-channel DSD files from external storage, the Front Left channel sound could also be heard from the Surround Right output. This issue has been resolved in the release.
- General disc compatibility improvements based on recent and upcoming Blu-ray releases as well as user-submitted disc samples, sample title includes "The Longest Day (Blu-ray, 2012)".
- All features and improvements of the previous firmware are also included in this version.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related OPPO Drivers