Intel Blade Server Management Module SBCECMM2 Firmware BPEO23E Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Intel Blade Server Management Module SBCECMM2 Firmware BPEO23E
Category	Firmware
Manufacturer	Others
File Size	20 MB
Supported OS	Windows All

Intel Blade Server Management Module SBCECMM2 Firmware BPEO23E Description

To use this package, perform the following steps: a). Open a Web browser. In the address or URL field, type the IP address or host name of the Management Module to which you want to connect. The Enter Network Password window opens. Note: The Management Module defaults to DHCP. If a DHCP host is unavailable, the Management Module assigns a static IP address of 192.168.70.125 after 2 minutes. b). Type your user name and password in the Enter Network Password window. If you are using the Management Module for the first time, you can obtain your user name and password from your system administrator. All login attempts are documented in the event log. A welcome page opens in your browser. Note: The Management Module is set initially with a user name of USERID and password of PASSW0RD (with a zero, not an O). This user has read/write access. Change this default password during your initial configuration for enhanced security. c). Select a timeout value, in minutes, in the field provided. If your browser is inactive for that number of minutes, the Management Module logs you off the Web interface. d). Click Continue to start the session. The browser opens the System Health page, which gives you a quick view of the system status. e). In the navigation frame, click MM Firmware Update under MM Control, then click Browse. f). Switch to the drive and directory containing the unpackaged files. Navigate to the PKT file you want to update. Note: There is one packet file that can be updated: CNETCMUS.PKT Do not restart the management module until CNETCMUS.PKT file has been flashed. g). Click Open. The file (including the full path) appears in the box beside Browse. h). To begin the update process, click Update. A progress indicator opens as the file is transferred to temporary storage on the Management Module. A confirmation page opens when the file transfer is completed. i). Verify that the PKT file shown on the Confirm Firmware Update page is what you intend to update. If not, click the Cancel button. j). To complete the update process, click Continue. A progress indicator opens as the firmware on the Management Module is flashed. A confirmation page opens to verify that the update was successful. k). If the CNETCMUS.PKT file has been flashed, continue with step 3l; otherwise repeat steps 3e through 3k until CNETCMUS.PKT has been flashed. l). After receiving a confirmation that the update process is complete, click the option "Restart MM" and click the Restart button. Click OK to confirm that you want to restart the Management Module. NOTE: Restarting the Management Module will disconnect your current session. m). Click OK to close the current browser window. n). To log into the Management Module again, open your browser and follow the regular login process. Note: To cancel this process at any point, click Cancel.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers