PCI-DB.com
  1. Driver
  2. Graphics Board
  3. ECS G41T-M12 (V1.0) Intel VGA Driver 14.42.1.5248 for XP

ECS G41T-M12 (V1.0) Intel VGA Driver 14.42.1.5248 for XP Download

Posted at December 21, 2024 by PCI-DB Team

Install Driver Automatically
Device NameECS G41T-M12 (V1.0) Intel VGA Driver 14.42.1.5248 for XP
CategoryGraphics Board
ManufacturerINTEL
File Size20.9 MB
Supported OSWindows XP

ECS G41T-M12 (V1.0) Intel VGA Driver 14.42.1.5248 for XP Description

CPU
- LGA775 socket for Core2 Quad/Core2 Duo/ Pentium Dual Core/ Celeron Dual Core/ Celeron 400 series processors
- LGA775 socket for latest Intel 45nm Multi-Core processors
- FSB 1333/1066/800 MHz

CHIPSET
- Intel G41 & ICH7
- North Bridge: Intel G41
- South Bridge: Intel ICH7

GRAPHICS
- Integrated Intel Graphics Media Accelerator 4500 (GMA4500)
- Integrated DirectX 10 graphics processor

MEMORY
- Dual-channel DDR3 memory architecture
- 2 x 240-pin DDR3 DIMM socket support up to 8 GB

EXPANSION SLOT
- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE
- Support by Intel ICH7
- 1 x Ultra DMA100/66 devices
- 2 x Serial ATA2 devices

AUDIO
- VIA VT1705 6-channel audio CODEC

LAN
- Realtek 8105E 10/100 Lan
- Realtek 8111E Giga Lan (Optional)

REAR PANEL I/O
- 1 x PS/2 keyboard & PS/2 mouse connectors
- 1 x D-sub(VGA)
- 1 x RJ45 LAN connector
- 1 x Audio port (Line-in, Line-out, Mic-in)
- 4 x USB 2.0 Ports

INTERNAL I/O CONNECTORS & HEADERS
- 1 x 24-pin ATX Power Supply connector
- 1 x 4-pin 12V Connector
- 1 x 4pin CPU_FAN connectors
- 1 x IDE connector
- 1 x Speaker header
- 1 x Front panel audio header
- 1 x Front panel switch/LED header
- 1 x SPDIF out header
- 1 x Serial port header
- 2 x SATA 3Gb/s connectors
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
- 1 x Parallel Header
- 1 x Chassis intrusion header
- 1 x Clear CMOS header

SYSTEM BIOS
- AMI BIOS with 8Mb SPI Flash ROM
- Supports Plug and Play, STR (S3) / STD (S4) , Hardware monitor, Multi Boot
- Supports ACPI & DMI
- Audio, LAN, can be disabled in BIOS
- F11 hot key for boot up devices option

FORM FACTOR
- Taille Micro-ATX, 244mm*170mm
Try to set a system restore point before installing a device driver. This will help if you installed a wrong driver. Problems can arise when your hardware device is too old or not supported any longer.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers

Find Missing Drivers

© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.