Intel Omni-Path Managed Switch Firmware 10.2.0.0.154 Download

Posted at April 29, 2024 by PCI-DB Team

Intel Omni-Path Managed Switch Firmware 10.2.0.0.154 Description

Fixed Issues:

- Edge switch does not provide a means to update the SSL/TLS certificate.
- The ESM has a memory leak.
- Cannot enable individual port beacons.
- Incorporate v0.47 of DC firmware into the Intel OmniPath Switch firmware build.
- When running ismPortStats -clear -all some counters like XMIT Wait and Rcv BECN do not clear.
- Director switches: changing the boot image on one management module (MM) also displays the change on the the second MM.
- The SSH key maximum length has been increased to 1024 (or 1023 including the null terminator).
- Performance manager agent (PMA) port counters do not clear from the opapmaquery command.
- The PMA appears to be adding together transmit and receive replay counts when reporting local link integrity errors.
- The Baud rate slows from 48 to 100 baud on the Director when running a capture using SSH.
- Edge Switch: when power cycling the managed Edge switch does not boot.
- 24-slot Director: ipftps_session tasks 1 & 2 are stopped.
- ipssh_::ffff task page faults.
- Unable to set an IPv6 address on OOB interface from the GUI.

This download is valid for the products listed below:

- Intel Omni-Path Edge Switch 100 Series 48 Port Managed 2 PSU
- Intel Omni-Path Director Class Switch 100 Series 24 Slot Base 1MM
- Intel Omni-Path Director Class Switch 100 Series 6 Slot Base 1MM

About Switch Firmware:

Given the large variety of models and different methods for upgrading the switch, if you wish to apply this package, we recommend that you read and understand the installation steps before you install a new firmware, even if you are a power user.

Usually the update procedure isn’t much of a hassle as manufacturers try to make it as simple as possible; however, there are cases that are exceptions to this rule. First off, go to the system information page of the switch to check that the currently installed version isn’t either newer or matching this release.

Applying a new firmware can decrease the security vulnerabilities, enhance overall performance and compatibility, improve various power management functions, resolve different errors, and add support for newly developed technologies and protocols.

It is recommended that you perform this step in a steady power environment such as the one ensured by a UPS unit, and that you don’t interrupt the upgrade in any way, because this might cause the switch to malfunction.

That being said, click the download button, get and apply the new version, and check back with our website constantly to stay up to speed with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers