Posted at November 21, 2024 by PCI-DB Team
Install Driver AutomaticallyDevice Name | Intel Graphics Media Accelerator Driver 15.12.2.64.1637 for Vista64 WHQL |
---|---|
Category | Graphics Board |
Manufacturer | INTEL |
File Size | 20 MB |
Supported OS | Windows Vista 64 bit |
Bug ID: 2787472
Blackscreen seen when reboot from installing driver -Accenture
NT - miniport
Root Cause:
Made changes to Monitor mode list enumeration logic, where in now we'll start recommending LFP Edid mode to OS
Bug ID: 2807426
TV format can not be retained after toggle one cycle via Fn+F4
CUI2.5
Root Cause:
The regqueryvalueex call used for reading registry was failing due because we were passing the size to be read as zero fixed it.
Bug ID: 2808183
Increasing the number of Albums in Niveus Movie Library WINDOWS MEDIA* CENTER Plugin decreases performance when cycling
Direct3D*
Root Cause:
The problem is that Windows Media Center sends primitives to draw all titles in every frame.
Verices are processed by UMD, which is a bottleneck and clipped in HW.
The fix was to clip veritices as soon as possible to limit the unnecessary processing in UMD. This can be achieved with software vertex processing pipeline.
Bug ID: 2808186
During OEM Ready Appverifier test, Muvee Reveal application breaks into the debugger
OpenGL*
Root Cause:
Bug ID: 2808252
When we do S3 aging test , the desktop will have some black points with 3GB memory
GMM
Root Cause:
Found race condition exposed in L-shape configs causing mis reads.
What we suspect was happening was that the driver would map a pte backing store into GTT and immediately read the corresponding gfx memory through PCI aperture. That should be fine b/c the GTT is mapped UC. However, that mapping is some how behaving like a WC (write combined) mapping. We believe the pte write did not complete before the gfx memory read so driver read from the old pte backing store, causing corruption or black dots.
By putting an mfence() after the last GTT write operation, it flushes the CPU memory cache guaranteeing the pte is written out before the driver reads the gfx memory.
Bug ID: 2855303
In External mode, we can't use Intel Driver to switch display to NB LCD mode.
NT - miniport
Root Cause:
Bug ID: 2855503
Return from S3 display will have black dot on the system with 3G memory.
GMM
Root Cause:
Found race condition exposed in L-shape configs causing mis reads.
What we suspect was happening was that the driver would map a pte backing store into GTT and immediately read the corresponding gfx memory through PCI aperture. That should be fine b/c the GTT is mapped UC. However, that mapping is some how behaving like a WC (write combined) mapping. We believe the pte write did not complete before the gfx memory read so driver read from the old pte backing store, causing corruption or black dots.
By putting an mfence() after the last GTT write operation, it flushes the CPU memory cache guaranteeing the pte is written out before the driver reads the gfx memory.
Bug ID: 2855586
If Enable PAVP Lite mode G41 can't use PowerDVD 8 playback BD
N/A
Root Cause:
Bug ID: 2856281
Screen Flashes when switch to aero viewing tab with LiveTv playing on Benicia.
Soft BIOS
Root Cause:
flip addresses were reported wrongly to O/S
Bug ID: 2912329
[Lyon, Samoa] When move dvd screen to 1'st, the LCD screen shows corruption
Resource Manager
Root Cause:
GrmSpriteDownscale was not taking into account the decimation. The sprite WM w.a was not applicable for CTG and its removed from CTG with this fix.
Bug ID: 2912407
Can't switch display mode from" Intel Graphics Options" .
NT - miniport
Root Cause:
Bug ID: 2912479
Open Windows Media Center, and play any music with full windows(default), Serious noise occurs
N/A
Root Cause:
Bug ID: 2912486
When you play particular BD title, horizontal noise happens in the lower side of the BD player.
N/A
Root Cause:
Bug ID: 2912493
LVDS no display issue under Windows with ICG driver
System BIOS
Root Cause:
Bug ID: 2912718
TV Wizard - Error message is displayed when hot plug HDMI with TV Wizard default install is disabled in INF
CUI2.5
Root Cause:
No check is made to ensure that TV Wizard is actually installed
Fix:
Check if TV Wizard is installed before launching the exe
Bug ID: 2913028
Back ground of TOSAVAPT is green.
N/A
Root Cause:
Bug ID: 2913032
TOSAVAPT whole video playback screen becomes green when select [YUV Matrix] BT601.
DVD
Root Cause:
Bug ID: 2913255
The display is collapsed when Dual Display Clone or Extended Desktop.
N/A
Root Cause:
Bug ID: 2954388
CUI SDK not working properly with 3rd party application using I2C
CUISDK
Root Cause:
Added checksum details for I2C calls and changes related that
Bug ID: 2808269
[Digital Display] word cut if set DPI to 120 and Ext. monitor is attached.
CUI2.5
Root Cause:
Current size specified for tabs is not sufficient in 120 DPI case
Fix: Dynamically change the width based on DPI Setting
120 DPI Setting is valid in Windows Vista*, not in Windows* XP. So changing it only for Windows Vista*
Bug ID: 2913238
Abnormal message window shows when test HDMI.
N/A
Root Cause:
Bug ID: 2913144
Graphic output function fail if the resolution doesn't support each other between CRT & LCD.
NT - miniport
Root Cause:
Bug ID: 2913034
TOSAVAPT whole video playback screen becomes green when play bear.wmv.
DVD
Root Cause:
Bug ID: 2912906
GFX: Windows Vista*32: DG45ID - Intel TV Wizard can't be installed on ICBO G45 system
N/A
Root Cause:
Bug ID: 2912784
[WMC]Display lags and audio is jerky in WINDOWS MEDIA* CENTER under clone mode.
N/A
Root Cause:
HKR, , Display1_DisableCloneAsyncFlips, %REG_DWORD%, 0 ; 1 - Disable and 0 - Enable
Change the default value to 1, this fixes the audio noise issue
Bug ID: 2912781
After update driver from driver v1545 to the latest driver v1599, the system will display blue screen.
NT - miniport
I
Root Cause:
Bug ID: 2912451
Bottom few lines are not displayed correctly on Blu-ray DVD playback.
N/A
Root Cause:
Bug ID: 2912441
When " BitBashing Support " enables, drivers does not read EDID extension block.
Soft BIOS
Root Cause:
Does not occur in the latest Version
Bug ID: 2912414
Garbage is displayed at the lower part of the BD playback screen.
N/A
Root Cause:
Bug ID: 2912301
DF260920 AD: Video distortion at the right side of LCD when set DP 1st & LCD 2nd by clone
Soft BIOS
Root Cause:
Bug ID: 2808130
Remote controller has no function on clone mode with D-sub connected
Soft BIOS
Root Cause:
The communication between IR driver and the WINDOWS MEDIA* CENTER application itself was broken. Graphics driver doesn’t play any role in this.
Bug ID: 2808071
Display lags and audio is jerky if play Live TV under clone mode.
N/A
Root Cause:
Bug ID: 2559807
Garbage is displayed when 3D screen saver is running.
Soft BIOS
Root Cause:
FLip address were reported incorrectly to OS
It is highly recommended to always use the most recent driver version available.
Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.
Device Type: Graphics Board File Size: 148.1 MB Windows 8.1 64 bit
Install DriverDevice Type: Graphics Board File Size: 355.1 MB Windows 10 64 bit
Install DriverDevice Type: Graphics Board File Size: 25.3 MB Windows 7 64 bit
Install DriverDevice Type: Graphics Board File Size: 354.1 MB Windows 10 64 bit
Install DriverDevice Type: Graphics Board File Size: 300 MB Windows 10 64 bit
Install DriverDevice Type: Graphics Board File Size: 49.8 MB Windows 7 64 bit
Install DriverDevice Type: Graphics Board File Size: 117 MB Windows 10 64 bit
Install DriverDevice Type: Graphics Board File Size: 111.5 MB Windows 8
Install DriverDevice Type: Graphics Board File Size: 300 MB Windows 10 64 bit
Install DriverDevice Type: Graphics Board File Size: 355.1 MB Windows 10 64 bit
Install Driver© 2024 PCI-DB.com - PCI Database Replacement. All rights reserved.