SanDisk Photo Album Firmware 3.9.24.53 Download

Posted at November 2, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	SanDisk Photo Album Firmware 3.9.24.53
Category	Firmware
Manufacturer	Others
File Size	733 KB
Supported OS	Windows All

SanDisk Photo Album Firmware 3.9.24.53 Description

To install firmware version 3.9.24.53 on the SanDisk Photo Album (SPA), follow these steps carefully:

1. Save the image.bin file on an EMPTY memory card

2. Make sure that the power cable is NOT connected to the SPA.

3. Make sure that all card slots are empty except for the slot with the card that contains the image.bin file. Please be aware that the firmware version on the card will be automatically deleted after installation. If you want to keep the firmware file you should make a copy first.

4. Connect the audio/video cable and the power cable. After the power cable is connected, the SPA turns on automatically. Make sure the TV is on and tuned to the input source that the SPA is connected to.

5. Press the play button (see on-screen instruction).

6. Wait till the LED near the slot stops blinking (takes about one minute) and turn on the device.

7. Check the firmware version by pressing on SETTINGS
& OPTIONS and select Firmware. The version should be 3.9.24.53

8. The settings are back at factory default. You might want to adjust Storage/Grouping and playback settings.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers