HP Officejet Pro 8610 e-All-in-One Printer Firmware R1547A Download

Posted at December 21, 2024 by PCI-DB Team

HP Officejet Pro 8610 e-All-in-One Printer Firmware R1547A Description

Fix and enhancements

- Compatibilities enhancement on "Scan to network folder"
- WPA2 security support enhancements
- Protected Management Frame support enhancements
- Support TLS 1.1, 1.2
- Wireless and wired network support enhancements
- Embedded web server support enhancements

Install instructions:

- Switch on the printer and wait until the printer is READY. [The Power light should be on]
- Double click on .exe file to launch the HP Printer Update utility. A list of HP Officejet Pro printers detected will be displayed on the screen.
Note: If the Wired network printer you wish to upgrade is not displayed in the detected printer list, click on the Refresh button to scan for printers connected via the wired network.
- Click on the checkboxes on the left to select single or multiple printers you wish to upgrade.
- Click on the Update button to start the firmware flashing process.
- Message showing The selected printer has been updated successfully will be shown. Firmware flashing will begin.
CAUTION! Do not interrupt the printer during the upgrade process. Printer may be damaged if power is interrupted during the firmware upgrade process.
- When the printer has successfully completed the flashing process, it will automatically print out a Printer Status Report, that will show the new firmware version.
- Click on the Done button to close the HP Printer Update utility.

About Firmware Package:

Before you even consider installing this firmware, go to the system information page of the device and make sure that the version currently installed on it isn’t newer or matching this one.

If you upgrade to this build, imaging devices can get printing and scanning quality improvements, new options added to the setup menu, feature enhancements, various fixes, as well as several other changes that can boost stability.

Considering the large number of devices and manufacturers, as well as the wide variety of methods for upgrading imaging units, we recommend that you read the installation steps and initiate a firmware update process only when you have familiarized yourself with the procedure.

In addition to that, it would be best if you perform this task in a steady power environment such as the one ensured by a UPS unit. Also, make sure you don’t power off the imaging device or use its buttons during the installation, in order to avoid any malfunctions.

Therefore, if you intend to apply this version, click the download button, and install the package. Remember to check with our website as often as possible so that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related HP Drivers