ECS G31T-M7 (v7.0) Realtek LAN Driver 5.732.0629.2009 for XP Download

Posted at November 21, 2024 by PCI-DB Team

ECS G31T-M7 (v7.0) Realtek LAN Driver 5.732.0629.2009 for XP Description

Specifications:

CPU:

- LGA775 socket for latest Intel Core 2 Quad/Core 2 Duo / Pentium Dual-core (E21xx series)/Celeron 4xx processors
- FSB 1333/1066 MHz

CHIPSET:

- Intel G31 & ICH7
- North Bridge: Intel G31
- South Bridge: Intel ICH7

GRAPHICS:

- Integrated Intel Graphics Media Accelerator 3100 (GMA3100)

MEMORY:

- Dual-channel DDR2 memory architecture
- 2 x 240-pin DDR2 DIMM socket support up to 4 GB
- Support DDR2 667/800 MHz Memory

EXPANSION SLOT:

- 1 x PCI Express x16 slot
- 1 x PCI Express x1 slot
- 2 x PCI slots

STORAGE:

- Supported by InteI CH7
- 2 x Ultra DMA 100/66/33 devices
- 4 x Serial ATA II devices

AUDIO:

- VIA VT1708B 6-channel High Definition audio CODEC

LAN:

- Realtek RTL8103EL 10/100 LAN (RTL8111DL Gigabit LAN Optional)

REAR PANEL I/O:

- 1 x PS/2 keyboard & PS/2 mouse connectors
- 4 x USB ports
- 1 x VGA port
- 1 x COM Port
- 1 x RJ45 LAN connector
- 1 x Audio port

INTERNAL I/O CONNECTORS & HEADERS:

- 1 x 24-pin ATX Power Supply Connector & 4-pin 12V Connector
- 1 x FDD connector supports one 360K~2.88MB FDD
- 4 x Serial ATA connectors
- 2 x USB 2.0 headers support additional 4 USB 2.0 Ports
- 1 x Clear CMOS header
- 1 x Front panel header
- 1 x Front panel audio header
- 1 x SPDIF out header
- 1 x CD in header
- 1 x Speaker header
- 1 x LPT header
- CPUFAN/SYSFAN connectors

SYSTEM BIOS:

- AMI BIOS with 4Mb SPI Flash ROM
- Supports Plug and Play 1.0A, APM 1.2, Multi Boot, DMI
- Supports ACPI revision 1.0 specification

FORM FACTOR:

- Micro-ATX Size, 244mm x 200mm

About Ethernet Driver:

Windows platforms generally apply a generic driver that allows motherboards to recognize the Ethernet component.

However, in order to make use of all network card (adapter) features, you must install a proper LAN driver that enables the hardware. This task enables systems to connect to a network, as well as collect all component characteristics such as manufacturer and chipset.

If you intend to update the driver version, know that this process can add support for new OSes, fix different compatibility problems, resolve related errors encountered during the product’s lifetime, as well as include various other changes.

When it comes to the actual installation procedure, we should note that most producers try to make it as easy as possible, so following the steps should be a breeze: just get the downloadable package, run the setup, and follow the on-screen instructions.

There is a chance that other OSes could also be suitable, but it is not advisable that you install this release on platforms other than the specified ones. Remember to perform a system reboot once done, to allow all changes to take effect properly.

Therefore, if you wish to apply this version, click on the download button and enable your network card. To stay up to speed with the latest updates, check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers