ASRock H87WS-DL ASMedia SATA Driver 1.3.8.0 Download

Posted at December 22, 2024 by PCI-DB Team

ASRock H87WS-DL ASMedia SATA Driver 1.3.8.0 Description

Key Features:

- ATX 12" x9.6"
- Single socket H3 (LGA 1150)
- Supports New 4th and 4th Generation Intel Core i7/i5/i3/Pentium/Celeron Processors (Socket 1150)
- 4 x DIMM DDR3 1600/1333 UDIMM, max. 32GB
- 1 x PCIe 3.0 x16, 1 x PCIe 2.0 x16, 2 x PCI
- 6 x SATA3 by Intel H87, support RAID 0,1,5,10
- 2 x SATA3 by ASMedia 1061
- 2 x Realtek 8111E VL, support Dual GLAN
- 4 x USB 3.0 ports (2 rear + 2 via header)
- 10 x USB 2.0 ports (4 rear + 6 via header)

This package contains the files needed for installing the SATA driver. If it has been installed, updating (overwrite-installing) may fix problems, add new functions, or expand existing ones. Even though other OSes might be compatible as well, we do not recommend applying this release on platforms other than the ones specified.

To install this package please do the following:

- Save the downloadable package on an accessible location (such as your desktop).
- Unzip the file and enter the newly-created directory.
- Locate and double-click on the available setup file.
- Allow Windows to run the file (if necessary).
- Read EULA (End User License Agreement) and agree to proceed with the installation process.
- Follow the on-screen instructions.
- Close the wizard and perform a system reboot to allow changes to take effect.

About SATA / AHCI / RAID Drivers:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don't forget to constantly check with our website so that you don't miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ASMedia Drivers