Motorola 2247-N8-10NA Gateway Firmware 9.0.1h2d13 Download

Posted at November 21, 2024 by PCI-DB Team

Motorola 2247-N8-10NA Gateway Firmware 9.0.1h2d13 Description

How to - upgrade your 2247-N8 operating system software:

NOTE: You will not be able to access the Internet during a software upgrade!
1. Download an updated software image file from your service provider or from Motorola. Store the software file on the computer that you are using to access the 2247-N8 Web management interface. 
IMPORTANT: Verify that the software image that you download is specifically for the Motorola 2247-N8 DSL Wi-Fi Gateway!
2. Click the Choose File or Browse button on the Upgrade page. A file browser window opens. Use the file browser to locate the downloaded software image file on your computer and select it. After the file is selected, the Upgrade screen shows the file name in place of the “No file chosen” note or empty input field next to the Choose File/Browse button.
3. Click the Upgrade button to start loading the new software image file to the 2247-N8. The Power light on the front panel of the 2247-N8 will flash red while the upgrade takes place.
IMPORTANT: Do not disconnect or turn off the power to the 2247-N8 during the software upgrade! If the upgrade is interrupted, the firmware image on the 2247-N8 may become corrupted and unrecoverable, making the 2247-N8 unable to start or re-attempt an upgrade. The installation of the new software may take a few minutes. Wait for the upgrade to complete. During this time, the Web management interface will display a repeating countdown.
4. Wait for the 2247-N8 to restart and load the new software. The Web management interface should re-initialize after the 2247-N8 restarts, and the “Home” page will show the new software image version number.

About Gateway Firmware:

By applying this firmware, your gateway can receives fixes for various vulnerability issues, support for newly developed technologies, several authentication-related enhancements, as well as other changes.

However, due to the wide variety of gateway models, as well as the large number of manufacturers, in order to perform a firmware update properly, it would be best if you read and understand the installation steps of this specific model.

In addition to that, it is also recommend that this process be initiated in a steady power environment, and only when you have completely familiarized yourself with the upgrade procedure.

Bear in mind that failing to perform a successful update or interrupting the firmware installation in any way can cause serious malfunctions to the gateway, and might even render it unusable.

Therefore, if you intend to install this version, click the download button and apply it to the gateway. To stay up to date with new releases, all you have to do is check back with our website as often as possible.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related ARRIS Drivers