MSI K9A2VM-FD Realtek PCI-E Ethernet Drivers 5.698.0701.2008 9x/Me/2000/XP Download

Posted at November 21, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	MSI K9A2VM-FD Realtek PCI-E Ethernet Drivers 5.698.0701.2008 9x/Me/2000/XP
Category	Network Card
Manufacturer	REALTEK
File Size	4.5 MB
Supported OS	Windows 9X ,Windows ME ,Windows 2K ,Windows XP

MSI K9A2VM-FD Realtek PCI-E Ethernet Drivers 5.698.0701.2008 9x/Me/2000/XP Description

Description:

CPU

• AMD® Phenom/Athlon/Sempron CPU.
Please refer to CPU Support for compatible CPU; the above description is for reference only.

Hyper Transport Bus

• HyperTransport 3.0 supporting speed up to 5200MT/s
- AM2 CPU supports HyperTransport 1.0/2.0
- AM2+ CPU supports HyperTransport 3.0

Chipset

• AMD® 780V and SB700 Chipset

Main Memory

• Supports Dual DDR2 533/667/800/1066
- 4 DDR2 DIMMs (240pin / 1.8V)
- Supports a maximum memory size up to 8GB.

  Slots

• 1 PCI Express x16 slot (PCI Express Bus SPEC V2.0 compliant)
• 1 PCI Express x1 slot
• 2 PCI slots, support 3.3V/ 5V PCI bus Interface.

  On-Board IDE

• One IDE port by AMD® SB700
- Supports Ultra DMA 66/100/133 mode
- Supports PIO, Bus Master operation mode
- Can connect up to two IDE devices

On-Board SATA

• 4 SATA II (1~4) ports by AMD® SB700
- Supports storage and data transfers at up to 3Gb/s

RAID Function

- SATA II 1~4 support RAID 0, 1 and 0+1 mode by AMD® SB700

  Audio

• Chipset integrated by Realtek® ALC888
- Flexible 8-channel audio with jack sensing
- Compliant with Azalia 1.0 Spec  

  LAN• Realtek PCI-E GbLAN controller 8111C
- Integrated Fast Ethernet MAC and PHY in single chip
- Supports 10Mb/s, 100Mb/s and 1000Mb/s
- Compliance with PCI-Express Bus specification v1.0a

Internal I/O Connectors

- ATX 24-pin power connector
- ATX 4-pin 12V CPU power connector
- CPU / System x 1 FAN connectors
- CD-in connector
- Front panel audio connector
- Front panel connector
- Chassis intrusion switch connector
- 3 x USB 2.0 connector support additional 6 ports
- 1 x Floppy disk drive connector
- 4 x Serial ATA II connectors
- 1 x ATA133 IDE connector
- Clear CMOS jumper
- 1 x SPDIF-out header (optional)
- 1 x TPM module header (optional)  

Back Panel I/O Ports

- 1 x DVI-D port   
- 1 x PS/2 keyboard
- 1 x PS/2 mouse
- 1 x 6 in 1 audio jack
- 4 x USB 2.0 ports
- 1 x RJ45 LAN jack
- 1 x Graphics Card port

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related REALTEK Drivers