MSI Wind Board 330 Intel INF Chipsets 945/955/965/975/Q3x/P3x/G3x/X3x Driver 8.3.0.1013 XP/Vista Download

Posted at December 22, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	MSI Wind Board 330 Intel INF Chipsets 945/955/965/975/Q3x/P3x/G3x/X3x Driver 8.3.0.1013 XP/Vista
Category	Motherboard
Manufacturer	Others
File Size	2.1 MB
Supported OS	Windows XP ,Windows Vista ,Windows XP 64 bit ,Windows Vista 64 bit

MSI Wind Board 330 Intel INF Chipsets 945/955/965/975/Q3x/P3x/G3x/X3x Driver 8.3.0.1013 XP/Vista Description

Description:

CPU
• Supports onboard Socket 437 for Intel® Atom 330 processor.
• Supports FSB 533MHz.

Chipset

• Intel® 945GC Chipset
- Integrated Intel® GMA 950 graphics core

• Intel® ICH7 Chipset
- Hi-Speed USB (USB2.0) controller, 480Mb/sec, up to 8 ports.
- 2 SATAII ports with transfer rate up to 3Gb/s.
- 1 channel Ultra ATA 100 bus master IDE controller.
- PCI Master v2.3, I/O APIC.
- ACPI 2.0 compliant. 

Main Memory

• Supports one unbuffered DIMM of 1.8 Volt DDR2 SDRAM
• Only supports 1 double-side (2GB Max) memory module.
• Supports DDR2 533 memory interface. (2GB Max)

Slots

• One 32-bit v2.3 master PCI bus slot. (support 3.3v/5v PCI bus interface)  

On-Board IDE/SATA

• One Ultra DMA 66/100 IDE controllers integrated in ICH7
- Supports PIO, Bus Master operation modes.
- Can connect up to two Ultra ATA drives.

• SATAII controller integrated in ICH7
- Up to 3Gb/sec transfer speed.
- Can connect up to two SATAII devices.

  Audio

• High Definition link controller integrated in Intel® ICH7 chip.
• Audio codec Realtek® ALC888, supports HD 5.1-channel audio-out.
- Compliant with Azalia Rev 1.0 spec.

LAN

• Supports 10 / 100 Mb/s Fast Ethernet by Realtek RTL8101E.

Internal I/O Connectors

- ATX 20-Pin power connector
- 4-pin ATX 12V power connector
- 1 x System FAN connector
- Front panel audio connector
- 2 x Front panel connectors
- 2 x USB 2.0 connectors
- 2 x Serial ATAII connectors
- 1 x ATA100 connector
- 1 x serial port pinheader
- Chassis intrusion switch connector
- Clear CMOS jumper

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Others Drivers