Intel STCK1A8LFC Compute Stick BIOS 0018 Download

Posted at December 21, 2024 by PCI-DB Team

Intel STCK1A8LFC Compute Stick BIOS 0018 Description

Versions:

- TXE Firmware: 1.1.1.1120
- Framework BIOS Reference Code: Based on 1.1.7
- GOP x32 Driver: 7.2.1008
- GOP x64 Driver: 7.2.1008

IMPORTANT: YOU MUST FIRST UPDATE TO INTERIM BIOS VERSION FC7018

- Copy the two .BIO files - FC7018.BIO and FC0018.BIO - to the root directory of a USB portable device.
- Connect a USB hub (with at least 3 ports) to the USB port on the Intel Compute Stick.
- Connect a USB keyboard and mouse to the USB hub.
- Connect the USB portable device to the USB hub.
- Plug the Intel Compute Stick into an HDMI display.
- Plug power into the Intel Compute Stick. (The Compute Stick will auto power on.)

Step One – update to interim version FC7018

- Press the F7 key when prompted during boot to enter BIOS update mode.
- Select the USB device from the list of devices shown.
- Select to update the BIOS to FC7018.
- The BIOS will update and then reboot.

Step Two – update to current version FC0018

- Press the F7 key when prompted during boot to enter BIOS update mode.
Note: if unable to enter BIOS update mode again via F7, remove power from the Compute Stick, then plug power back in and try again.
- Select the USB device from the list of devices shown.
- Select to update the BIOS to FC0018.
- The BIOS will update and then reboot.
- Press F2 to enter BIOS setup.
- Press F9 to set BIOS defaults.
- Correct the date and time if needed.
- Press F10 to save changes and exit.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers