WD My Cloud Mirror Gen2 Personal Storage Firmware 2.21.126 Download

Posted at November 5, 2024 by PCI-DB Team

WD My Cloud Mirror Gen2 Personal Storage Firmware 2.21.126 Description

What's new:

- Resolved security vulnerability related to remote access.
- Improved MyCloud Cloud connectivity across MyCloud web, mobile & client apps.

Manually Updating the firmware on your NAS:

- Important: Make sure you stop all processes and save all your data before performing the firmware update.
- Note: My Cloud devices require a hard drive inserted into the bay and a volume must be created to perform the firmware update.
- Do not interrupt the firmware upgrade process. Doing so may cause the device to malfunction or unable to boot. 
- If you are using the manual update method, do not rename the firmware file. Doing so will cause the manual update to fail and can corrupt the system.

Updating the firmware on your NAS:

- Download the firmware to your desktop.
- Unzip the file and you will find the actual firmware.
- Save this to your desktop.
- Open the My Cloud Dashboard UI.
- Go to Settings >> Firmware Update.
- Under the section Manual Update, click the Update From File button and a window will open.
- Browse to where you saved the unzipped file and select it.
- You will see a pop up confirming to upgrade your firmware, click Ok.

About HDD Firmware:

Updating the HDD’s (Hard Disk Drive) firmware version can fix various problems that might occur, enhance some of the features available or add support for new ones, and improve the unit’s overall performance.

However, as this task can be very risky, applying a different firmware is recommended only when the newer version specifically resolves an issue that bothers you, or brings about changes that you can make full use of.

In addition to that, make sure you perform this task only in a steady power environment (such as the one ensured by a UPS unit).

As for the update process, due to the wide variety of HDDs and various methods provided by each manufacturer for installing a new firmware, it would be best if you carefully read and understand the installation steps.

That being said, if you consider updating the HDD to this firmware version, click the download button, and make sure you read the installation guide before initiating the upgrade. Moreover, constantly check with our website to stay up to date with the latest releases. 

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Western Digital Drivers