EVGA X99 Classified BIOS 2.03 Download

Posted at December 22, 2024 by PCI-DB Team

EVGA X99 Classified BIOS 2.03 Description

Changes:

- Support Intel XTU 10 core control.
- Add more memory ratio 3400/3600/3800.
- Optimizing fan curve.
- Add secure boot.
- Update flash information in ME firmware.
- Fix minor issues.

Windows Installation:

- Download the correct .zip file
- First go into your BIOS and load defaults, save and exit
- Close all open programs.
- Go into the folder where you unzipped this package and update.bat
- Press Y to start the flash process
- DO NOT TURN OFF POWER OR RESET DURING THE FLASH PROCESS
- After the flashing is finished, the system will automatically shut down. Then power on again and go into BIOS to setup.
- NOTE: If flash box immediately closes after flash attempt, the flash may need to be ran from a CMD prompt with administrator privileges or DOS version.

BIOS Installation:

- Extract the contents of .zip file to USB flash drive (must be formatted as FAT32)
- Reboot the machine and go into the system BIOS
- From the BIOS, navigate to the Save & Exit tab and open "Select BIOS File."
- Select the .bin file you wish to flash.

About OS Independent BIOS:

Although installing a newer BIOS version might add new features, update various components, or improve the device’s usability, this process is very risky, so the upgrade is recommended to be performed only when it is really needed.

In addition to that, this task should be performed by someone who has the knowledge to successfully complete the installation; regular users may fulfill it at their own risk.

When it comes to applying a new version without taking into account the computer’s operating system, the most commonly used method to flash the BIOS is by creating a bootable USB or CD containing the update file, and running it from DOS.

The Basic Input/Output System (BIOS) is a very important software that loads the currently installed OS, and tests all of the system’s hardware components – so make sure you flash it correctly.

About BIOS Update Utility:

Applying a new BIOS version can bring various fixes, add new features, or improve existing ones; however, this action is very risky and should be carefully carried out in a steady power environment (such as the one ensured by a UPS unit), and only when it is really needed.

Moreover, it is recommended that the BIOS be upgraded by someone who has the ability to use advanced system features. It can also be fulfilled by a regular user as well, but at their own risk.

When it comes to changing the BIOS version, the update utility searches for a compatible package in any given location or on the web and, if found, it will automatically install the desired build, if and when your approval is given.

Do take into account that failing to perform the installation could seriously damage your system, and the faulty BIOS might even render it unusable.

Therefore, if you intend to upgrade your BIOS, hit the download button, get and install the package, and run the utility to check if a newer version is available. Don’t forget to check with our website as often as possible to be up to date with the latest releases.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related EVGA Drivers