Sony PMW-F55 CineAlta 4K Camera Firmware 2.1 Download

Posted at December 18, 2024 by PCI-DB Team

Install Driver Automatically

Device Name	Sony PMW-F55 CineAlta 4K Camera Firmware 2.1
Category	Scanner Digital Camera Webcam
Manufacturer	Sony
File Size	63.6 MB
Supported OS	OS Independent

Sony PMW-F55 CineAlta 4K Camera Firmware 2.1 Description

This firmware can be updated from any existing firmware version of PMW-F55 and PMW-F5 directly. After updating to 2.1, F55/F5 must not be downgraded to previous version.

Attention:

- When you directly update F55 and F5 to 2.1 from 1.15 and earlier, you must do “All Reset” in System menu. Otherwise 2.1 software becomes unstable. If you want to maintain menu setting before update, please save “All File” in File menu and load it after updating. If you had already updated F55 and F5 to V1.20 and later and did “All Reset”, you don’t need to do “All Reset” again.

Modification from 2.0 to 2.1:

1. Double speed drive mode of View Finders
Double speed drive mode of View Finders (DVF-EL100/L350/L700) is available on “VF Setting” Menu in 23.98, 24.0, 25.0 and 29.97 System frequency. This function can reduce flicker on the VF. When in HDCAM SR File recording mode, S&Q motion, Slow Shutter and over 180 degree shutter angle is selected, this function is not available.

2. Wind noise cut filter function

F55/F5 gets a wind noise cut filter on “Audio Input” Menu.

3. Additional Wi-Fi remote control

Wi-Fi Remote control has a “control lock” function and a display for connection status on right-upper area. And you can control following Camera Menus items on the Setup Menu page.

4. Additional HD Edge Crop Output on RAW mode

HD Edge Crop Output from SDI connector is available in RAW mode. This function is selectable on “4K/2K to HD Conv.” in “Output Setting” Menu.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Sony Drivers