Advanced Network Devices IP Clockwise IPS 2.0 Firmware 1.5.0001 Download

Posted at December 21, 2024 by PCI-DB Team

Advanced Network Devices IP Clockwise IPS 2.0 Firmware 1.5.0001 Description

Fixes:

- Add light sensor SNMP traps and runtime control of trap levels.
- Add support for rheostat input, including SNMP traps.
- Add Polycom PTT/Paging support.
- Add timed mode and slower blink rate to flasher LEDs.
- Add timed GPIO mode.
- Add display progress bar feature.
- Add display background image feature.
- Add slave analog clock correction.
- Add additional diagnostic information in SNMP MIB. (e.g. factory options, more config file info, IPv6 addresses, noise generation parameters, priority ignore, display brightness levels) Add reset to factory default options.
- Add more SIP ring tone options.
- Add model number to device status web page.
- Add HTTP control of low priority ignore activation.
- Add noise volume offset on peer device displays. Improve device settings interface.
- Add count of ignored audio packets for each broadcast. Improve implementation of SIP protocol, specifically to improve integration with Polycom and Yealink phones.
- Add option to turn outputs ON with ANY text or ANY audio.
- Add always-on peripheral power consumption value.
- Add SIP volume control using IR remote.
- Add IP Camera support.

Update Method

- Open the device's webpage (using IP Clockwise or some other means)
- In the Device Settings->Firmware sub-menu, type in the new filename as listed below (i.e. you don't need to actually download the files if you use AND's public HTTP server)
- Click the "Reboot Now" link to reboot the device (it will then go to the HTTP site automatically and download the new firmware and upgrade the device)

About Device Firmware:

Applying a newer firmware version than the one already installed on your unit can bring various enhancements, include workarounds for diverse problems encountered by the device, and improve or add newly developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s overall performance to drop. However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and understand the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of the times quite risky, this step should be taken by users that have the ability to successfully complete the update; regular users may initiate it at their own risk. Moreover, it’s best that this task be performed in a steady power environment such as the one ensured by a UPS unit.

Therefore, if you consider applying this release, hit the download button, take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly check with our website to ensure that you don’t miss a single new release.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Other Drivers