Gateway E-4350 Intel Chipset Driver 7.0.0.1025 for XP Download

Posted at December 18, 2024 by PCI-DB Team

Gateway E-4350 Intel Chipset Driver 7.0.0.1025 for XP Description

Specifications:

- Processor Options
Intel Pentium 4 Processor 530J with HT Technology
3.0 GHz
800 MHz FSB
1 MB L2 cache
Intel Pentium 4 540J with HT Technology
3.2 GHz
800 FSB
1 MB L2 cache

- Chipset
Intel 925X Chipset with DDR 2 Support

- Memory Support
1.8 V (only) DDR2 SDRAM DIMMs
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMS with x16 organization are not supported.
4 GB maximum total system memory.
Minimum total system memory: 128 MB
Non-ECC DIMMs
Serial Presence Detect
DDR2 533 MHz or DDR2 400 MHz SDRAM DIMMs

- Video
NVIDIA FX540 128 MB Video Memory with DVI and VGA Out

- Audio
Integrated Intel High Definition Audio

- Network Adapter
Integrated Marvell 10/100/1000 Twisted Pair Ethernet

- Hard Drive Options
73 GB Ultra320 SCSI NSCA 15K RPM
73 GB Ultra320 SCSI NSCA 10K RPM
74 GB 10K RPM SATA150 with 8 MB cache
80GB 7200RPM SATA with 2MB cache

- Controller
Integrated ultra ATA100 and serial ATA150 controllers

- Floppy Disk Drive
3.5-inch 1.44 MB drive

- Optical Drive Options
20X/48X IDE CD-ROM
48X/32X/48X CD-RW/DVD Combo drive
16X Double-Layer Multi-Format DVD writer DVD/R/RW/CD-R/RW

- Expansion Slots
One PCI-E ×16 (available for graphics card option)
One PCI-E ×1
PCI conventional (full height, full length)

- External Ports
Six USB 2.0 (4 at rear, 2 in front)
One IEEE 1394 FireWire (at rear)
One Serial
One Parallel
One PS/2 mouse
One PS/2 keyboard
One RJ-45 Integrated LAN
Rear Digital Audio Ports
Front headphone and microphone jacks

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related Intel Drivers