Gateway E-4300 Intel Graphics Driver 6.14.10.3971 for XP Download

Posted at November 24, 2024 by PCI-DB Team

Gateway E-4300 Intel Graphics Driver 6.14.10.3971 for XP Description

Specifications:

- Processor
Intel Pentium 4 520 Processor with HT Technology (2.8 GHz, 800 MHz FSB, 1 MB cache, Socket T)
Chipset Intel 915G

- Memory
512 MB DDR Dual Channel 400 MHz SDRAM
Two 256 DIMM
Expandable to 2 GB

- Memory Slots
Four DDR2 Sockets on Motherboard (184 pin)
Expandable to 4GB
Not compatible with DDR memory

- Video
Integrated Intel Direct AGP Graphics Accelerator 900
Up to 128 MB Dynamic Video Memory Technology

- Disk Controller
One floppy drive channel
Integrated ultra ATA100 and serial ATA150
One IDE channel each supporting two devices per controller
Four Serial ATA channels supporting one device per controller

- Hard Drive
40 GB Ultra ATA 100 7200 rpm hard drive with 2 MB cache*
Hard drive accessible capacity varies; GB = 1 billion bytes.

- Floppy Drive
3.5-inch 1.44 MB floppy disk drive

- Optical Drive
48X/32X/48X CD-RW drive

- Audio
Intel High-definition Audio

- Network
Integrated Marvell PCI 10/100/1000 twisted pair Ethernet

- Expansion Bays
External: one 5.25-inch, one 3.5-inch, one 3.5-inch slimline
Internal: one 3.5-inch

- Expansion Slots
One PCI-E x 16
One PCI low profile

- Front I/O Ports
Two USB 2.0 ports
One microphone
One headphone

- Rear I/O Ports
Four USB 2.0 ports
One IEEE 1394 port
One Serial
One Parallel
Two PS/2
One RJ-45 integrated LAN
One VGA (monitor)
One audio in/out
One microphone

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related INTEL Drivers