Canon EOS-1D X Mark II Camera Firmware 1.1.2 Download

Posted at November 5, 2024 by PCI-DB Team

Canon EOS-1D X Mark II Camera Firmware 1.1.2 Description

Fixes and improvements:

- The addition of a selectable color-tone option for the LCD monitor.
- The addition of a function to append IPTC data.
- The addition of a function to transfer only protected images.
- The addition of a function to set the GPS positional data retention period.
- An increase in the number of network connection settings that can be saved to a memory card from 20 to 40.
- When retrying FTP transfer, extension of the minimum auto power off time to 10 minutes.
- Improvement of wireless transmission when using Wireless File Transmitter WFT-E6.

Update the camera to the new firmware:

- Save and unzip the downloadable archive onto a formatted memory card.
- Insert the SD memory prepared into the camera.
- Set the mode dial to [P/Tv/Av/M/C/Recording].
- Press the power button to turn the camera on in shooting mode.
- Press the [MENU] button to display the menu screen.
- Press the [ Left ][ Right ] buttons or use the [ Settings ] dial to select the [ Settings - 4 ] tab.
- Press the [ Up ][ Down ] buttons to choose the firmware ver, and then press the [SET] button.
- With [Camera] selected, press the [SET] button.
- The current firmware version will be displayed, so choose [OK], and then press the [SET] button.
- Choose the file to use for the update, and then press the [SET] button.
- The firmware update confirmation screen appears, so choose [OK], and then press the [SET] button to start the firmware update.
- After the update is completed, the lamp on the back of the camera will stop blinking, and the power will be automatically turned off.
- Perform the operations in Step 1, and check that the [Firmware ver.] displayed has been updated to the new version.
- Press the power button to turn off the camera, and then remove the SD memory card.

About Digital Camera Updates:

Updating to a newer firmware version than the one already installed on your camera can improve the device’s overall performance and stability, resolve various issues, and add support for newly developed features or enhance existing ones.

On the other hand, downgrading the camera’s firmware can recover its functionality in the unlikely event the currently installed version is faulty or the device’s performance dropped after an upgrade. However, bear in mind that applying an earlier build might not always be possible.

It is recommended that changing the camera’s firmware be performed when the new release resolves an issue that your device has been encountering, or adds a new feature (or enhances an existing one) that could prove useful for you.

This process isn’t intended to be destructive, but still, it’s best to save all your personal data and configurations before applying a different firmware. Moreover, make sure that the battery is fully charged and don’t use the camera’s buttons while the installation is in progress.

When it comes to the update method, usually, you must copy the firmware file onto a compatible memory card, insert it into the camera, and browse from the menu to the device’s update section.

However, each device has various ways to enter the update mode and particular steps that should be taken for a successful upgrade, therefore make sure you read the product’s installation guide.

That being said, if you consider that this firmware improves your device in any way, then hit the download button and get the desired version; if not, check with our website as often as possible so that you don’t miss the update that will boost your camera’s performance.

  It is highly recommended to always use the most recent driver version available.

Try to set a system restore point before installing a device driver. This will help if you installed an incorrect or mismatched driver. Problems can arise when your hardware device is too old or not supported any longer.

Related CANON Drivers